Cycle Settings Con’t
Final Spin Speed
The High, Medium and Low spin speeds have been developed for each cycle. The speeds will vary from cycle to cycle. For example, High Speed in the Normal cycle is much faster than High Speed in the Handwash cycle.
•Increasing spin speed will extract more water and decrease drying time.
•Decreasing spin speed will reduce wrinkling.
•HANG DRY is available with some cycles to gently spin items that should not be machine dried.
•Use NO SPIN to omit the final spin at the end of the cycle. The load will be very wet. Remove items from the wash drum to drip dry or select DRAIN / SPIN to remove excess water at a more convenient time.
Soil Level
Select HEAVY SOIL to increase the wash time or LIGHT SOIL to decrease the wash time in some cycles.
Cycle | Heavy Soil |
Heavy | + 2 minutes |
Normal | + 2 minutes |
Perm Press | + 2 minutes |
Water Level
There is no need to select a water level. The washer auto- matically adjusts the water level to the type and size of wash load.
Cycle Options
To select or delete the Press Saver, Extra Rinse, Extra Spin or Cycle Signal, press OPTIONS until the blinking light indicates the desired option. Then, while it is blinking, press SELECT. The indicator will light when the option has been selected. It will no longer be lighted when the option has been deleted. To provide the best care for your laundry items, not every option is available with every cycle.
Press Saver
Adding the Press Saver option alters the spin pattern of the cycle to further reduce wrinkling.
Extra Rinse
Use this option when additional rinsing is desired to re- move excess dirt and detergent. It is recommended for heavily soiled loads or if household members have sensi- tive skin. Extra Rinse occurs before the final rinse when the liquid fabric softner is dispensed.
Extra Spin
Use this option to add several additional minutes to the final spin at the selected speed. This will improve water extraction and decrease drying time.
Cycle Signal
A signal will sound at the end of the cycle when the cycle signal is selected.
Washer Features
Delay Start
Press Delay Start to select a wash time convenient to your schedule or during off peak energy hours. The start of the cycle can be delayed for up to 12 hours.
Control
To avoid having someone accidentally start or stop the washer, press OPTIONS and SELECT at the same time
until the Control 
indicator is lighted. To unlock the controls, press OPTIONS and SELECT again.
Estimated Time
The estimated total cycle time will be displayed when the cycle is selected. The time may increase if water pressure is low or the load becomes unbalanced. The approximate time remaining will be displayed during the cycle.
Status Lights
The following will be displayed at the appropriate times during the cycle:
•Door Lock
•Wash
•Rinse
•Final Spin
•Control 
PN 134489700A (0501)