Cycle Selection(continued)
Perm Press Cycle
Provides up to 12 minutes of wash agitation for cottons and blends with a
Knits & Delicates Cycle
Provides 8 minutes of wash/pause agitation for the gentle care of knit and delicate items. Always set the Knits & Delicates cycle to begin at the START position.
Controls
Always follow instructions on fabric care labels.
WASH/RINSE TEMPERATURE sets the water temperatures for washing and rinsing. Select wash water temperature according to fiber content and soil level of the load, and type of detergent used. A cold water rinse saves energy and reduces wrinkling.
The following chart suggests wash/rinse temperatures for basic fabric types.
| Wash/Rinse |
Fabric Type | Temperature |
Heavily soiled white/colorfast | Hot/Cold |
cotton, perm press |
|
Lightly soiled white/colorfast | Warm/Cold |
cotton, perm press |
|
Noncolorfast fabrics, knits, | Cold/Cold |
delicates, washable woolens |
|
|
|
LOAD SIZE sets the amount of wash and rinse water for the wash load. Select a water level appropriate for the load size. There should be enough water for items to move freely.
Energy Saving Tips
•Wash full loads. Oversize loads use extra energy. Undersize loads waste energy.
•When small wash loads cannot be avoided, use lower water levels.
•Select the appropriate cycle and time for each load. Shorten wash times for lightly soiled loads.
•To reduce drying time, select a fast spin speed to remove more water from heavy items such as towels and jeans.
•Use warm water to wash most loads. Limit hot water washes to heavily soiled and white loads. Use cold water for lightly soiled items and rinsing.
•Operate the washer in early morning and late evening when utility demands are low.
•Follow proper laundry procedures to avoid rewashing.
P/N 131665500 (9703)