Kenmore 796.4027 manual Wash cycle time is longer than usual, Musty or mildewy odor in washer

Page 27

BEFORE CALLING FOR SERVICE (cont.)

Door will not unlock when cycle is stop_d or paused

Check if,.

Then.,,

Interiortemperature of washer is too high,

The washer door has a safety feature to prevent burns

 

For example, if the washer is paused during the hot wash portion of

 

a sanitary cycle, the interior temperature of the drum will be very hot,

 

so the door will not unlock. This is normal. Allow the washer to coo]

 

until the DOOR LOCK indicator turns off on the display.

Water level in washer is too high,

Allow the washer to complete the programmed cycle, or press the

 

CANCELJDRA]Nbutton to drain the water,

Wash cycle time is longer than usual

Check if,,.

amount of laundry,water pressure, water heating time, and

IThe washer automati_]ly adjusts the wash time for the other operating conditions.

Musty or mildewy odor in washer

Check if,,.

Incorrector too much detergent has been used,

Insideof tub not cleaned pro_r]y.

Then,,,

This is normal. The washer adjusts cycle time automatically to provide optimal resuBtsfor the selected cycle. The time remaining shown in the display is only an estimate. Actual time may vary.

Then,,,

Use only HE (High-Efficiency)detergent in a_rdance with the manufacturer'sinstructions.

Run the CLEAN WASHER cycle regularly. Be sure to wipe around and under the door seal frequently. See Care and Cleaning of the Interiorin Care and Cleaning on page 21.

Clean around door seal/glass to prevent odor or mildew:

1, Wipe dry the door seal/glass and the door opening area

2, Wipe around the inner drum/door seal and the lower door sea]

3.For di_cult-to-remove odors, use Affresh available at your local Sears store or online at www.partsdirect.com.

Check if,,.

Then,..

Washer not unloaded promptly,

Always remove items from the washer as soon as the cycle is

 

_mplete.

Washer overloaded.

The washer can be fully loadedbut the drum should not be tightly

 

packed, and the door should close easily.

Hot and cold water inlet hoses are reversed,

Hot water rinse can set wrinkies in garments, Che_ the inlet hose

 

_nnections,.

27

Image 27
Contents Front.Loading Automatic Washer Some limitations and exclusions apply Master Protection AgreementsPage Iiiiiiiiiiiiiiiiiiiiiii!iiiii!i iiii!i!ili!ii!iiii Grounding Instructions To Connect ElectricityKEY Parts and Components Flooring KEY Dimensions SpecificationsPower Outlet Choose the Proper LocationUnpacking and Removing Shipping Bolts Ijjii!ii!!!!!iidamagei!i!!ili!to the washerConnecting the Water Lines Option 2 Laundry Tub Connecting the Drain HoseConnect to Power Supply Option 1 StandpipeLeveling the Washer Installation of NON-SKiD PadsSpecial Cycle and Option Buttons Control Panel FeaturesPower Onjoff Button Cycle Modifier Buttons Cycle Selector KnobSelect a Cycle Operating the WasherADD Detergent and Other Products Turn on the WasherCycleMifiers Cycle GuideDo not Overload the Drum Sorting Wash LoadsFabric Care Labels Grouping Similar ItemsLiquid Bleach Compartment About the DispenserPre-Wash Detergent Compartment Main Wash Detergent CompartmentFilling the Dispenser Detergent and Dispenser USEWord About Detergents Designed to use onlyTime and Status Display LOAD-SENSING IndicatorCycle Status Indicator Door Lock IndicatorSoil Level Cycle Modifier ButtonsWASH/RINSE Spin SpeedNd Rinse Cycle Option ButtonsRemoving Mineral Buildup Cleaning the ExteriorCare and Cleaning of the Interior Door Seal and Glass CleaningCleaning the Dispenser Regular CleaningCleaning the Water Inlet Filters MaintenanceCleaning the Drain Pump Filter MaintenanceNormal Sounds YOU MAY Hear Before Calling for ServiceWasher will not turn on Before Calling for ServiceMusty or mildewy odor in washer Wash cycle time is longer than usualDisplay shows Display showsChk if Disclaimer of Implied warranties limitation of remedies One-Year Limited Warranty