Kenmore 29052 operating instructions Cycle Selection, Controls, Regular Cycle, Washable woolens

I ¸¸111111!

II!l!lll "!Ill !!!Ill II!I II!llll IM ¸ "11/ !r "1 I! I_r II I¸

Cycle Selection

For best results, follow the fabric care label directions on items to be washed.

Prewash Cycle

Hand Washables Cycle

Up to 9 minutes of gentle tumble action for the gentle care of knit, delicate and hand washable items. Two rinses and 2 spins complete the cycle. Select Normal or Fast Final Spin as desired for this cycle.

EXTRA RINSE - Use Extra Rinse when additional rinsing is desired to remove excess dirt and detergent from heavily soiled loads.

Select Extra Rinse YES to automatically include an extra rinse in the Regular or Perm

Press cycle.

The Prewash Cycle can be used to help remove protein-based stains such as milk, grass or blood and to help loosen soils before washing. During Prewash, the washer will tumble the load for 6 minutes, drain, spin and shut off. Use the amount of detergent and other laundry products recommended for a normal wash cycle.

The Prewash water temperature is the same as the wash water temperature selected. To avoid setting protein stains, select cold water.

This cycle should always be followed by a complete wash cycle using the recommended

amount of detergent.

Regular Cycle

Up to 19 minutes of reversing tumble action for most fabrics. Three rinses, a high-speed final spin, a pause and a brief tumble complete the cycle.

Heavy Wash provides up to 19 minutes of reversing tumble action for heavily soiled

fabrics.

Wash provides up to 13 minutes of reversing tumble action for normally soiled fabrics.

Short Wash provides up to 6 minutes of reversing tumble action for lightly soiled fabrics.

Perm Press Cycle

Up to 13 minutes of reversing tumble action for cottons and blends with a no-iron finish. Three

Controls

Always follow instructions on fabric care labels.

Note: There is no need to select a water level because the washer automatically adjusts the water level to the type and size of wash load.

WASH/RINSE TEMPERATURE - This determines water temperatures for washing and rinsing. For example, the Warm/Cold setting provides a warm water wash and a cold water final rinse.

Note: Detergents are not as effective at wash water temperatures below 65°F (18.3°C).

The following chart suggests wash/rinse

temperatures for basic fabric types.

Wash/Rinse

Fabric T_vDe TemPerature

Heavily soiled white/colorfast Hot/Cold cotton, perm press

Normally soiled white/colorfast Warm/Cold cotton, perm press

Lightly soiled/noncolorfast Cold/Cold

fabrics, knits, delicates,

hand washables

Select Extra Rinse NO to conserve water when an extra rinse is not desired.

FINAL SPIN - There are two spin speed options available for the Perm Press and Hand Washables cycles.

Normal is recommended for most loads, especially hand washables and items which may wrinkle easily.

Fast provides a faster spin speed to increase water extraction and make items feel drier at the end of the cycle.

The following chart shows the speed selections

available.

FINAL SPIN
Gy._ckt	_	F_a_
Regular*	Fast	Fast
Perm Press	Medium	Fast
Hand Washables	Slow	Medium

*The Final Spin in the Regular cycle is nonadjustable. Final spin speed in the Regular cycle is fast regardless of control setting.

rinses, 2 spins, a pause and a brief tumble complete the cycle. Select Normal or Fast Final Spin as

desired for this cycle.

Washable woolens Warm/Cold

CYCLE SIGNAL - A signal will sound at the end of

the cycle. The Cycle Signal is adjustable and can be set at OFF or from QUIET to LOUD.

Note: If the signal is turned to the OFF position, it will not sound at the end of the cycle.

DOOR LOCK INDICATOR LIGHT - The indicator light is on when the cycle selector knob is pulled out. The light turns off at the end of the cycle. See your Use and Care Guide for detailed information.

P/N 131809400 (9812)