JVC XM-228BK manual Dividing a track Divide, Press SET on the main unit or the remote control unit

TITLE /EDIT

or

SET

or

Dividing a track (DIVIDE)

A track can be divided into desired number of tracks by adding track markings in the middle, in the desired points or where you want to search later.

This makes it possible to assign track numbers after recording medley music or FM broadcast. The track numbers after the divided track are incremented automatically.

1Press EDIT on the main unit or the TITLE/EDIT on the remote control unit to select “DIVIDE”.

The DIVIDE indicator lights up.

Each press of the button switches the editing functions as follows.

•When TITLE/EDIT on the remote control unit is used, the disc title is displayed after “ALL ERASE”.

DIVIDE JOIN MOVE ERASE ALL ERASE

MD total playing time display (Disc title)

Blinks

1 2 3 4 5

6

2Press SET on the main unit or the remote control unit.

Blinks Blinks

1 2 3 4 5

6

or

or

3 Play the track to be divided. Using the jog dial or 4 or ¢:

Select the track number by turning the	Blinks	Blinks
jog dial on the main unit or 4or ¢		1 2 3 4 5
on the remote control unit.		6
Then, Press 6on the main unit or 3	Example)
on the remote control unit.	When track No. 3 is selected

Using the numeric keys:

Select the track number with the numeric keys on the remote control unit. The selected track is repeatedly played.

To select a track, see “Selecting a track with the numeric keys” on page 9.

SET

or

4Press SET when a point where you want to divide the track comes.

“POSITION” is displayed and the	Blinks	Blinks
track marking fine-adjustment display	1	2	3 4 5
appears.	6	7

Increments by 1

Example) Track Nos. 3 and 4 blink and the 4-second section from the divided point will be played repeatedly.

•When the track has been divided as desired, go to step 6.

•If the track has not been divided as desired, fine-adjust the track marking position. Go to step 5.

•If you notice that the selected track number is wrong, press 7STOP/CANCEL on the main unit or CANCEL on the remote control unit and repeat from step 3.

19