Soakcycle
For best results, use warm water for soaking stained laundry. Hot water can set stains.
1.Use recommended amount of
2.Push Cycle Control Knob in.
3.Turn clockwise to point to a number next to SOAK.
4.Pull the Cycle Control Knob out. The washer will start.
5.When the cycle is over, add detergent for the next selected wash cycle. The SOAK Cycle should always be followed by a wash cycle.
NOTE: See the Laundry Guide for additional soaking information.
MAGICCLEAN”lint filter
The lint filter in your washer cleans itself. Collected lint is drained away with the wash and rinse water.
If your washer drains into a tub, remove any lint collected in the drain or strainer.
Liquidbleachdispenser
Always measure bleach. Do not guess. Never use more than 1 cup (250 mL) for a full load. Use less with lower water level settings. Follow directions on bottle for safe use. Use a cup with a pouring spout to avoid spilling.
1.Load the washer first.
2.Pour measured bleach carefully into dispenser. Do not let bleach splash, drip or run down into washer basket. Undiluted bleach will damage any fabric it touches.
3.Start the washer. Bleach will be diluted automatically during the wash part of the cycle.
11