If you need service or assistance,
we suggest you follow these four steps:
L Before calling for
assistance...
Performance problems often resuli from little things you can find and fix yourself without tools of any kind
If your washer does not fill:
l Is the power supply cord plugged into a live circuit with the proper voltage?
l Are both water faucets Open?
l Have you checked your home’s main fuses or circuit breaker box? l Are the water supply hoses kinked?
l Is the Cycle Control Knob set and pulled out?
If your washer does not spin:
lIs the lid closed?
l Is the power supply cord plugged into a live circuit with the proper voltage?
l Have you checked your home’s main fuses or circuit breaker box?
If your washer stops during the per- manent press cycle:
l Remember, the washer will stop for about 2 minutes after the partial drain during the
If your washer fills and drains with- out running:
l Make sure that the Cycle Control Knob is pointing to a number in the cycle.
Make sure the drain hose is higher than the water level in the washer. If it isn’t...
l The washer may seem to be drain- ing during wash and rinse cycles.
l Water can siphon out. (See “lnstalla- tion Instructions!‘)
13