Winterizing
Because some water stays in the washer, freezing can cause a lot of damage. If your washer is stored or moved during the cold weather...
1.Shut off both water faucets. Disconnect and drain water inlet hoses.
2. Put a quart | of | 3. Set the | washer for a | |
R.K type |
| DRAIN | and SPIN [see | |
antifreeze | in the | page | IO). Let it run | |
basket. |
| for about | 30 seconds | |
|
| to mix | the | antifreeze |
|
| and water. |
|
To use the washer again...
1.Flush water pipes and hoses.
2.Connect hoses to the washer
3.Turn on the water faucets.
4.Run the washer through a com- plete cycle with one cup of deter- gent to clean out the antifreeze.