Using your Washer
Your automatic washer is easy to use. To make it even easier, read the following steps before starting your first load.
Start your washer after you put in detergent, the load, and any other laundry aids according to Information on page 3 and page 6
1.Set the LOAD StZE SELECTOR.
l Select the water level that matches the size of the load. See page 5 for more information.
IMPORTANT: For the best cleaning results with the least wrinkling, make sure the load has enough water for items to move freely.
2.Set the TEMPERATURE SELECTOR. l Match the wash and rinse water tem- peratures to the type of fabrics and soils being washed See the instructlons under the washer lid and on page 14 In your ioundry Gude
3.Select a Cycle and Start the Washer.
l Push the Cycle Control Knob in and turn it to the right (clockwlse).
l Stop when the pointer is on the num- ber of minutes of washing you want In the cycle you want.
l Instructions for which cycles to use for each fabric type are under the lid.
l To start the washer, pull the Cycle Control Knob out. When the cycle IS over, the washer will stop.
l To stop the washer at any time during a cycle, push the Control Knob in. Pull it out to restart the washer. l To change a setting, push the Con- trol Knob in to stop the washer. Then turn the Control Knob to the right [clockwise] to the setting you want. Pull the knob out to start the washer.
l Pages
4