Whirlpool JS854F specifications Consumption of Water, Handling of Common Faults

Page 2

Users’ Guide

NOTES ON CONTROL PANEL

JS854F

CONSUMPTION OF WATER AND

1. Power Switch

Press the switch to connect the mains; press it again to cut off power supply.

The machine will automatically shut off in 3 minutes after completion of wash program or when the machine is in abnormal operation mode.

The washer will be in fuzzy logic status when switched on. When you press the "START / PAUSE" button, the washer will start operating, autochecking, setting the water level and completing the whole washing process. If you press other buttons, the washer will automatically quit the fuzzy logic mode and enters into manual control mode.

2. Wash Program

Select appropriate wash programs according to, the texture and degree of dirt of fabrics by pressing " V " " V ". " BASKET CLEANING " is only used for cleaning the drum.

3. Set Program

Use these 4 buttons to change the preset washing program manually.

Press " V " " V " buttons to select different programs.

Press " + " " - " buttons to change the time and number of cycles of selected programs.

Press " + " or " - " button once to increase or reduce one minute/ number of cycle / half hour, or keep pressing this button, the displayed number keep changing. Release the button, the change stops.

The preset washing time will be displayed as HH:MM, indicating that the washing process will be finished at the display time. After setting the time, press the "START/PAUSE" button. The washer will be in Start Delay mode. After 30 seconds, only the Delay Timer indicator blinks and "START/PAUSE" button lits up. When the washing cycle starts, the lights will return to their original state. Due to different speeds of water intake, the actual time may vary from the preset time.

4. Start / Pause

Press the button to start operation.

Press the button to suspend operation during the wash process.

5. Water Level Selection

Appropriate water level will be selected automatically based on laundry load and texture of fabrics when the machine is in fuzzy logic control mode.

Press "Water Level" button to select water level by yourself.

The selected water level could be changed during wash process. "Min Water Level" is only applicable to "Mini Wash".

6. Process Selection

Press this button when the machine is in pause mode. You may select combination of wash process other than preset process. Please refer to the washing process selection list on the reverse.

While the washer is paused, you may reset the washing process combination.

Lights of respective programs will be on when this button is pressed.

The flashing display light indicates the progress of wash program.

7. Function Selection

According to the degree of dirt of laundry, select " Overflow Rinse". "Overflow Rinse" means the continuous injection of water during rinse process to drain off filth and soap bubbles through overflow outlet.

To wash 1.0 Kg, select "MINI WASH". It can be used with any combination of washing programs. "MINI" water level will be automatically set at "MINI WASH".

"ECO WASH" is designed for saving energy,suitable for washing small quantity of lightly soiled clothes.

HANDLING OF COMMON FAULTS

Consumption of Water

Water Level

Wash Load (kg)

Water Consumed (L)

High

3.5-5.0

46

Medium

2.5-3.5

38

 

 

 

Low

1.5-2.5

32

Very Low

1.0-1.5

26

Mini

1

20

Handling of Common Faults

Manifestations of Faults

Causes and Handling

 

After automatic adjustment for two times, imbalance

 

problem is still unresolved. Please place the laundry

E1

evenly. Or the lid is not properly closed, or has been

opened by someone during wash process. Close

 

the lid to resume operation."E1" status will continue

 

until faults are attended.

 

Indicating faults in drainage. The drain pipe is not

E3

put down, or clogged, or frozen. Put the drain pipe

down and clear it up. Open and close the lid once

 

to resume operation. If still unattended, the machine

 

will shut down after 1.5hr.

 

Indicating failure to attain the best water level after

 

30-minute water intake. To be treated and checked

E4

as "Malfunction of wash". If the problem is solved,

open and close the lid again to resume water intake.

 

If problem unattended, the machine will shut down

 

automatically after 1hr.

JS854F

棉質

Cotton

合成纖維

Synthetics

電源

混合

Mixed

ON / OFF

 

 

 

 

羊毛 Wool

 

快速

Quick

 

滾桶清洗

 

Basket Cleaning

Spin Time

水時間

Washing

主洗時間

Time

 

Rinse Cycle

過水次數

Delay Timer 預校

啟動

暫停

Start /Pause

 

 

Overflow

High

浸洗 Soaking

溢出過水 Rinse

Mid

主洗 Wash

少量洗 Mini Wash

Low

過水 Rinse

省電洗 Eco Wash

Very Low

Spin

 

迷你 Mini

 

 

水位

過程

功能

Water

Process

Function

Level

 

 

Attention

If the problem still remains, contact the service

people for repair. Please do not disassemble the

 

machine by yourselves.

The following symptom is not a fault :

If the drum stops spinning during the spinning process, " b1 " or " b2 " will be displayed. This means the clothes have shifted to one side while spinning, creating an imbalance. The machine will fill with water again to attempt to redistribute the clothes and will begin spinning again if the imbalance is corrected.

Whirlpool is committed to continued product enhancement.

Product materials and specifications is subject to changes without prior notice.

1

2

3

4

5

6

7

Image 2
Contents Full-Automatic Program Wash Procedures and Product SpecificationsWash Procedures Consumption of Water Handling of Common FaultsHandling of Common Faults Consumption of Water洗衣程序 洗衣時間 過水次數 適用範圍啟動暫停 電源開關洗衣程序 水位選擇

JS854F specifications

The Whirlpool JS854F is a standout kitchen appliance that combines modern design with advanced technology to elevate the cooking experience. This sliding induction range brings precision cooking to your home, allowing for a seamless transition between stovetop and oven cooking.

One of the main features of the JS854F is its flexible induction cooktop, equipped with four powerful elements that respond quickly to temperature adjustments. Induction cooking provides an efficient and safe method as it uses electromagnetic energy to directly heat pots and pans, resulting in faster cooking times and less heat loss. The surface remains cool to the touch, reducing the risk of burns and making it a family-friendly option.

The oven of the JS854F is equally impressive, featuring a spacious capacity that makes it suitable for everything from everyday meals to festive feasts. With True Convection technology, the oven ensures even cooking throughout, allowing users to bake multiple dishes at once without worrying about uneven heat distribution. Its advanced heating system also means food cooks faster, retaining moisture while producing a perfect golden finish.

Another remarkable aspect of the JS854F is its Smart Wi-Fi capability, which allows users to control and monitor their oven remotely through a smartphone app. This feature adds a layer of convenience, enabling home chefs to preheat the oven, adjust temperatures, and receive notifications when cooking is complete – all from the palm of their hand.

The range also includes a self-cleaning function, which simplifies maintenance. The steam clean option is particularly useful for those looking for a quick clean without harsh chemicals, making it an environmentally friendly choice.

In terms of design, the Whirlpool JS854F boasts a sleek stainless steel exterior that enhances any kitchen aesthetic. Its intuitive controls and easy-to-read display make it user-friendly, catering to both novice cooks and seasoned chefs. With its combination of modern aesthetics, innovative cooking technologies, and thoughtful features, the Whirlpool JS854F induction range represents a perfect blend of functionality and style, making it a worthy addition to any contemporary kitchen.