Whirlpool TEDS680E, TEDX640E warranty Changing the Drum Light, To change drum light

Page 16

CARING FOR YOUR DRYER

CHANGING THE DRUM LIGHT

The dryer light automatically turns on inside the dryer drum when you open the door. See instructions below to change your drum light.

1.Unplug the dryer or disconnect the electricity leading to the dryer at the main power supply.

2.Open the dryer door. Remove the light bulb cover from the back wall of the dryer by removing the screw located in the lower right corner of the

cover.

4.Replace the bulb with a 10-watt appliance bulb only.

5.Replace the light bulb cover.

3. Remove the light bulb by turning it	6. Reconnect power supply.
counterclockwise.

Image 16

Contents Electric 3406074AThank you for buying an Estate appliance Please record your modelÕs informationDryer Safety On nextDryer Safety Other doors Parts and FeaturesLarge side-swing door Checking Your Vent WWARNINGChecking Your Vent Using Your Dryer Starting Your DryerCycle and temperature tips LoadingLoading suggestions Drying tipsModel TEDX640E Auto Sense DryingTimed Dry cycles No Heat FluffModel TEDS680E Timed Dry cycleType of Load No Heat Fluff Cycle No Heat Fluff CycleRUBBER, PLASTIC, HEAT-SENSITIVE Fabrics Using the Drying Rack Rack DRY Cycle Temperature TimeWool sweaters Stuffed toys or pillowsCleaning the Lint Screen Every load cleaningAs needed cleaning Caring for Your DryerCleaning the Dryer Interior Lint SignalTo clean dryer drum Changing the Drum Light To change drum lightCommon Drying Problems TroubleshootingProblem Cause Solution Lint in load Stains onLoad ItemsAssistance or Service If YOU Need Assistance or ServiceIf YOU Need Replacement Parts For Further AssistanceFrom Date of Purchase Service companyWhirlpool Corporation will not PAY for