Understanding what happens in each cycle
When the Cycle Control Knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down.
During agitation, the XTRA ROLL ACTION* agitator creates a continuous
rrlrollover action that orovides a thorough cleaning of the wash load.
After agitation starts, the Cycle Control Knob turns clockwise until it points to an OFF area and the cycle ends.
NOTES:
l The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.
l A Gentle Wash system helps protect your fabrics by reducing wash agitation speed during the last few minutes of wash agitation in the Heavy, Normal, and
P. Press/Wrinkle Resist cycles.
WASH | RINSE |
Fill | Fill |
w4 |
|
Wash selected time | Rinse |
t4 | Drain+ | u |
| |
No agitation | ||||
|
| |||
t The P. Press/Wrinkle Resist cycle partially | I’stJ | |||
drains, fills, | agitates briefly, and drains. | |||
| ||||
Spin
Soin
MAGIC CLEAN* lint filter
The lint filter at the bottom of the washer basket cleans itself. During agitation, wash and rinse water passes over the filter, separating the lint from the water. The lint is then spun away from the filter and out of the system during the spin
If your washer drains into a tub, remove any lint collected in the tub or strainer.
MAGIC CLEAN | Basket |
lint filter | interior |
10