Whirlpool DESIGN 2000 manual Starting your washer, Select a, Select Water, Overload Washer

/I I’

starting your washer

Before starting your washer:

I, Measure and add detergent. 2. Place sorted load in washer.

3. Start washer.

Select a

1. LOAD SIZE

l Turn the knob to point at a setting that describes the size of load you want to wash.

. Set the knob on or between EX SMALL (a few items] and LARGE (a full load).

See pages 6 and 7

of your “Laundry Guide:’

NOTE: Use the LARGE water level for best permanent press results.

I

Select WATER

2. TEMPERATURES

l Match the wash water temperature to the type of fabrics and soils being washed.

l All rinses are cold. Cold rinses save energy and help prevent wrinkles from setting into fabrics.

Recommended wash temperatures can be found in your “Laundry Guide:

1 LOAD SIZES AND WATER LEVELS

9 A

For best cleaning results, the load must be able to move freely

;I in the water. Too big a load or too

2little water can cause wear or !’ tearing of load items.

‘,	*Approximate	u
i	fill with load.	“-	1.
b

CAUTION : DO NOT

0 OVERLOAD WASHER.

LARGE (17.3 gals./655 L)’ (14.7 galsJ55.7 L)* (12.1galsJ45.8 L)*

” F.XSMALL (9.5 galsJ36.0 L)’

;

4