Whirlpool 3950319 manual Using Your Washer, Loading suggestions

USING YOUR

WASHER

UnderstandingWasherCycles

When the Cycle Control knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down.

During agitation, the agitator (on some models) creates a continuous rollover action that provides a thorough cleaning of the wash load.

After agitation starts, the Cycle Control knob turns clockwise until it points to an OFF area and the cycle ends.

NOTE: The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.

WASHRINSE

1. Fill 1. Fill

2.	Wash	2.	Rinse
	selected
	time
3.	Drain†	3. Drain
	No agitation		No agitation
4.	Spin	4.	Spin-Spray
			rinse

5. Spin

†	The Permanent Press	6. Off
	cycle partially drains, fills,
	agitates briefly, and
	drains.

Loading

Loading suggestions

For these suggested full-sized loads, set the LOAD SIZE selector to the highest load size setting.

SUPER CAPACITY PLUS WASHERS

Heavy Work Clothes	1 coverall
3 pair pants
3 shirts	1 overall
4 pair jeans
Delicates	2 bras
3 camisoles
1 quilted robe	2 nighties
4 slips	1 baby’s dress
4 panties
Towels
10 bath towels	14 wash cloths
10 hand towels	1 bath mat
Mixed Load	2 shirts
3 double sheets
4 pillowcases	2 blouses
8 T-shirts	8 handkerchiefs
6 pair shorts

5