Whirlpool 3955887 Washer Care, Cleaning Your Washer, Water Inlet Hoses, Moving and Storage

Page 5

WASHER CARE

Cleaning Your Washer

Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach from the outside of your washer.

Clean your washer interior by mixing 1 cup (250 mL) of chlorine bleach and 2 cups (500 mL) of detergent. Pour this mixture into your washer and run it through a complete cycle using hot water. Repeat this process if necessary.

Remove any hard water deposits using only cleaners labeled as washer safe.

Cleaning the liquid fabric softener dispenser (on some models):

1.Remove dispenser by grasping top with both hands and squeezing, while pushing upward with thumbs.

2.Rinse dispenser under warm water, then replace it.

NOTE: Some models are equipped with a liquid fabric softener dispenser. To avoid damage to the washer or clothing, do not wash clothes with the liquid fabric softener dispenser removed or add detergent or bleach to this dispenser; it is for liquid fabric softener only.

Water Inlet Hoses

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

Moving and Storage

Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather, winterize it.

Winterizing your washer

1.Shut off both water faucets. Disconnect and drain water inlet hoses. Pour 1 qt (1 L) of R.V.-type antifreeze into the basket.

2.Run washer on a drain and spin setting for about 30 seconds to mix the antifreeze and remaining water.

3.Unplug washer or disconnect power.

To use washer again

1.Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.Plug in washer or reconnect power.

3.Run the washer through a complete cycle with 1 cup (250 mL) of detergent to clean out antifreeze.

Storage, non-use or vacation care

Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:

1.Unplug washer or disconnect power.

2.Turn off the water supply to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away.

5

Image 5
Contents Washer User Instructions Your safety and the safety of others are very important Washer SafetyStarting Your Washer Washer USEWarm Wash Temp Suggested Fabrics HotCold To stop or restart your washerWasher Care Cleaning Your WasherWater Inlet Hoses Moving and StorageWasher and Components TroubleshootingStains on load Washer ResultsResidue or lint on load Call Replacement partsTo locate FSP replacement parts in your area