WASHING PROCEDURE
TO WASH (A-type)
1.Before starting to wash, proceed as follows, Connect the water supply hose and open the water tap.
• Lay the drain hose down toward
a sinkhole. (In case no drain pump)
• Place the drain hose in sink or bath. |
(In case no drain pump) |
• Connect the power cord to the power |
supply outlet. |
TO WASH (B-type)
1.Before starting to wash, proceed as follows, Connect the water supply hose and open the water tap.
• Lay the drain hose down toward
a sinkhole. (In case no drain pump)
•Place the drain hose in sink or bath. (In case no drain pump)
•Connect the power cord to the power supply outlet.
TO SPIN DRY
1. Transfer the clothes into the spin basket and arrange the clothes evenly.
2. Be sure to replace the safety cover and close the
inner lid.
safty cover
2. Set the CYCLE SELECTOR KNOB to |
2. Select the WASH
Normal
“WASH.RINSE”.(in case drain pump WASH) |
Delicate Heavy
CONTROL KNOB (LITE)
Wash/Rinse | Wash |
Drain Rinse | Drain |
CYCLE SELECTOR | CYCLE SELECTOR |
3.Set the WTER SELECTOR KNOB to the desired mode.
4.Set the WASH SELECTOR KNOB to the desired mode.
5.Fill water in the wash tub and add the detergent.
6.Load laundry in the
wash tub and fill water to proper water level.
Wash Spin
WATER SELECTOR
for desired mode.
WASH CONTROL
3. Press the | DRAIN | WASH |
DRAIN SELECTOR KNOB |
|
|
to ‘WASH’. | DRAIN SELECTOR |
4. Fill water in the wash tub and add the detergent.
5. Load laundry in the wash tub and fill water to proper water level.
6. Set the WASH TIMER |
| 0 | |
15 |
|
| |
| 3 | ||
|
|
| |
| 12 | 6 | |
7. After washing Press the |
| 9 | |
| WASH TIMER | ||
DRAIN SELECTOR KNOB to |
| ||
DRAIN |
| WASH | |
|
|
3. Close the spin dryer lid.
4. Set the SPIN DRY
TIMER |
| 0 |
5 | 1 | |
| 4 | 2 |
|
| 3 |
| SPIN DRY TIMER |
7.Set the WASH TIMER
8.After washing, set the CYCLE SELECTOR KNOB to 'DRAIN' for drain.
0
15 3
126
9
WASH TIMER
‘DRAIN’ for drain. |
DRAIN SELECTOR
3