Samsung J1260A(V/S), J1060A(V/S), J1460A(V/S) Selecting a location, Adjusting the leveling feet

Page 5

Installing the Washing Machine

Selecting a location

Before you install the washing machine, select a location with the following characteristics:

A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below)

Away from direct sunlight.

Adequate ventilation

Room temperature that will not fall below 0 ˚C

Away from sources of heat such as coal or gas

Make sure that the washing machine does not stand on its power cord.

Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

Adjusting the leveling feet

If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):

1.Loosen the leg bolt by turning it with your hand until it is at the desired height.

2.Tighten the locking nut by turning it with the supplied wrench.

Place the washer on a sturdy, flat surface.

If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Only a l degrees angle is allowed.)

Removing the shipping bolts

Before using the washing machine, you must remove the five shipping bolts from the back of the unit. To remove the bolts:

2

1 3

1.Loosen all bolts with the supplied wrench before removing them.

2.Take each bolt head and pull it through the wide part of the hole. Repeat for each bolt.

3.Fill the holes with the supplied plastic covers.

4.Keep the shipping bolts for future use.

Connecting the water supply hose(Option)

1. Remove the adaptor from the

 

 

4. Connect the water supply hose to the adaptor.

 

 

Pull down part (c) of the water supply hose.

water supply hose.

 

 

 

 

c

When you release part (c) the hose automatically

 

 

 

connects to the adaptor making a ’click’ sound.

2. First, using a “+” type screw driver, loosen the

 

 

5. Connect the other end of the water supply hose

four screws on the adaptor. Next, take the

 

 

to the inlet water valve at the top of the washer.

adaptor and turn part(b) following the arrow until

 

 

Screw the hose clockwise all the way in.

there is a 5mm gap.

 

 

 

3. Connect adaptor to the water tap by tightening

 

 

If the water tap has a screw type faucet, connect

the screws firmly.

a

 

the water supply hose to the tap as shown.

Then, turn part (b) following the arrow and put(a)

 

 

b

 

 

and (b) together.

 

 

 

NOTICE After completing connection, if water leaks from the hose, then repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

SAMSUNG Washing Machine Owners Instructions 3

Image 5
Contents Washing Machine Owner’s Instructions Safety Precautions Table of Contents Overview of the washing machine Installing the Washing MachineUnpacking the Washing Machine Selecting a location Adjusting the leveling feetPositioning the drain hose Connecting the water supply hosePlugging in the machine Wiring lnstructionsOverview of the control panel Washing a Load of LaundryNo spin Rinse HoldStart/Pause selection button Putting detergent in the washing machine Washing for the first timeWhen the cycle is finished Washing clothes using Fuzzy LogicWashing clothes manually Using Delay StartFabric Type Load Capacity Washing tips and hintsCleaning the exterior Repairing a frozen washing machineMaintaining the Washing Machine Draining the washing machine in an emergencyCleaning the debris filter Cleaning the detergent drawer and recessTo do this Cleaning the water hose mesh filterProblems and solutions TroubleshootingUnderstanding error messages Before contacting After-Sales serviceType of Wash Programme ChartUser option Electrical warnings Fabric care chartAppendix Declaration of conformity SpecificationProtecting the environment Case the Need for Servicing Arises

J1060A(V/S), J1460A(V/S), J1260A(V/S) specifications

The Samsung J1260A(V/S), J1460A(V/S), and J1060A(V/S) are part of Samsung's robust lineup of printers tailored for various printing needs in both home and office environments. Each model boasts distinct features and functionalities, catering to different user requirements while ensuring high-quality output and reliability.

The Samsung J1260A(V/S) is designed for efficiency and versatility. It features fast printing speeds of up to 30 pages per minute, making it suitable for high-volume printing tasks. The printer supports automatic duplex printing, which not only saves time but also reduces paper consumption, contributing to an environmentally friendly operation. With a maximum print resolution of 1200 x 1200 dpi, the J1260A(V/S) delivers sharp and vibrant prints, perfect for both text documents and images. Its user-friendly interface and compact design allow for easy integration into any workspace.

On the other hand, the Samsung J1460A(V/S) takes performance a notch higher with enhanced features that cater specifically to small and medium-sized businesses. This model supports mobile printing capabilities, allowing users to print directly from smartphones and tablets via NFC and Wi-Fi Direct. The J1460A(V/S) also includes advanced security features, ensuring that sensitive documents remain protected. Additionally, its higher paper capacity means fewer interruptions, enhancing productivity in busy environments.

Lastly, the Samsung J1060A(V/S) is a more budget-friendly option that doesn’t compromise on quality. It is ideal for home offices or users who need a reliable printer for occasional printing tasks. With decent printing speeds and an easy setup process, the J1060A(V/S) is user-friendly and accessible. It supports basic connectivity options, including USB and wireless printing, allowing for straightforward operation without the complications of more advanced features.

In summary, the Samsung J1260A(V/S), J1460A(V/S), and J1060A(V/S) offer a range of solutions for diverse printing needs. Each model features cutting-edge technology, whether it’s high-speed printing, mobile connectivity, or enhanced security, ensuring that users can find the perfect printer tailored to their specific requirements. With Samsung’s commitment to innovation and quality, these printers uphold the brand's reputation for reliability and performance in the printing landscape.