Samsung F1245(V/S) Selecting a location, Adjusting the leveling feet, Removing the shipping bolts

Page 5

Installing the Washing Machine

Selecting a location

Before you install the washing machine, select a location with the following characteristics:

•A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below)

•Away from direct sunlight.

•Adequate ventilation

•Room temperature that will not fall below 0 ˚C

•Away from sources of heat such as coal or gas

Make sure that the washing machine does not stand on its power cord.

Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

Adjusting the leveling feet

If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):

1.Loosen the leg bolt by turning it with your hand until it is at the desired height.

2.Tighten the locking nut by turning it with the supplied wrench.

•Place the washer on a sturdy, flat surface.

If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Only a l degrees angle is allowed.)

Removing the shipping bolts

Before using the washing machine, you must remove the five shipping bolts from the back of the unit. To remove the bolts:

2

1 3

1.Loosen all bolts with the supplied wrench before removing them.

2.Take each bolt head and pull it through the wide part of the hole. Repeat for each bolt.

3.Fill the holes with the supplied plastic covers.

4.Keep the shipping bolts for future use.

Connecting the water supply hose(Option)

1. Remove the adaptor from the

 

 

4. Connect the water supply hose to the adaptor.

 

 

Pull down part (c) of the water supply hose.

water supply hose.

 

 

 

 

c

When you release part (c) the hose automatically

 

 

 

connects to the adaptor making a ’click’ sound.

2. First, using a “+” type screw driver, loosen the

 

 

5. Connect the other end of the water supply hose

four screws on the adaptor. Next, take the

 

 

to the inlet water valve at the top of the washer.

adaptor and turn part(b) following the arrow until

 

 

Screw the hose clockwise all the way in.

there is a 5mm gap.

 

 

 

3. Connect adaptor to the water tap by tightening

 

 

• If the water tap has a screw type faucet, connect

the screws firmly.

a

 

the water supply hose to the tap as shown.

Then, turn part (b) following the arrow and put(a)

 

 

b

 

 

and (b) together.

 

 

 

NOTICE After completing connection, if water leaks from the hose, then repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

SAMSUNG Washing Machine Owner’s Instructions 3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Washing Machine Owner’s Instructions Safety instructions Before using the applianceTable of Contents Overview of the washing machine Installing the Washing MachineUnpacking the Washing Machine Connecting the water supply hoseOption Adjusting the leveling feetSelecting a location Removing the shipping boltsPositioning the drain hose Connecting the water supply hosePlugging in the machine Wiring lnstructionsOverview of the control panel Washing a Load of LaundryNo spin Rinse HoldStart/Pause selection button Putting detergent in the washing machine Washing for the first timeWhen the cycle is finished Washing clothes using Fuzzy LogicWashing clothes manually Using Delay StartFabric Type Washing tips and hintsCleaning the exterior Repairing a frozen washing machineMaintaining the Washing Machine Draining the washing machine in an emergencyCleaning the debris filter Cleaning the detergent drawer and recessTo do this Cleaning the water hose mesh filterProblems and solutions TroubleshootingUnderstanding error messages Before contacting After-Sales serviceType of Wash Programme ChartProgram Electrical warnings Fabric care chartAppendix Declaration of conformity SpecificationProtecting the environment Case the Need for Servicing Arises

F1245(V/S), B1445(V/S), F1045(V/S), B1045(V/S), B1245(V/S) specifications

Samsung has established itself as a leader in home appliance technology, particularly in their line of washing machines. Among their offerings, the Samsung B1245(V/S), B1045(V/S), F1045(V/S), B1445(V/S), and F1245(V/S) models stand out due to their unique features, advanced technologies, and user-friendly characteristics.

The Samsung B1245(V/S) is designed with efficiency in mind. It features a powerful wash motor that ensures a thorough clean while maintaining energy efficiency. This model also incorporates EcoBubble technology, which dissolves detergent in water and generates bubbles that penetrate fabrics faster, thus enhancing the washing performance even in cold water. Additionally, the B1245(V/S) comes equipped with a Diamond Drum, which is designed to be gentle on clothes, preventing fabric damage while effectively removing dirt and stains.

Similarly, the B1045(V/S) enhances washing capabilities with its Digital Inverter Motor, which not only delivers powerful cleaning but also operates silently. This innovation reduces the energy consumption significantly while extending the lifespan of the machine. With its quick wash option, users can enjoy clean clothes in a fraction of the time, making this model ideal for busy households.

The F1045(V/S) model is another innovative entry that emphasizes smart washing solutions. It offers a Full Wash program that combines soaking and washing, ensuring even the toughest stains are removed. This model is also equipped with a Child Lock feature, ensuring safety during operation, especially in homes with small children. Furthermore, the F1045(V/S) boasts a sleek, modern design that fits seamlessly into any laundry room setting.

Moving on to the B1445(V/S), this washing machine is designed for larger loads, with a capacity that makes it suitable for families. Its Smart Check feature allows users to diagnose troubles via a smartphone app, making maintenance more straightforward and convenient. The model also includes multiple wash cycles tailored for various fabric types, ensuring that users always get the best results.

Finally, the F1245(V/S) presents a blend of style and functionality. It provides multiple drying options, catering to diverse laundry needs. The model is enhanced with features like air dry and steam cleaning, which not only eliminates wrinkles but also reduces allergens, making it suitable for sensitive skin.

In summary, Samsung’s range of washing machines, including the B1245(V/S), B1045(V/S), F1045(V/S), B1445(V/S), and F1245(V/S), stand out due to their innovative features and advanced technologies. With a focus on energy efficiency, fabric care, and user convenience, these models exemplify Samsung's commitment to delivering high-quality home appliances that cater to modern-day laundry needs.
Top Page Image Contents