Samsung SWF-P8, SWF-P10 Troubleshooting, Problems and solutions, Understanding error messages

Page 16

Troubleshooting

Problems and solutions

The washing machine will not start

Make sure the door is firmly closed.

Make sure the washing machine is plugged in.

Make sure the water source faucet is turned on.

Make sure to press the Start/Pause button.

No water or insufficient water supply

Make sure the water source faucet is turned on.

Make sure the water source hose is not frozen.

Make sure the water intake hose is not bent.

Make sure the filter on the water intake hose is not clogged.

Detergent remains in the detergent drawer after the wash program is complete

Make sure the washing machine is running with sufficient water pressure.

Put the detergents in the inner parts of the detergent drawer(away from the outside edges).

Washing machine vibrates or is too noisy

Make sure the washing machine is set on a level surface. If the surface is not level, adjust the washing machine feet to level the appliance (see page 3).

Make sure that the shipping bolts are removed (see page 3).

Make sure the washing machine is not touching any other object.

Make sure the laundry load is balanced.

The washing machine does not drain and/or spin

Make sure the drain hose is not squashed or bent.

• Make sure the water hose mesh filter is not clogged (see page 13).

The Door Open button does not work

1. Disconnect the power plug from the power supply.

2.Remove the water from the washing machine.

3. Use a screwdriver to pop off the plastic base cover. Set it aside.

4.Locate the orange plastic tab and pull forward to open the door.

Understanding error messages

Error displayed Solution

Close the door.

Make sure the source water faucet is turned on.

• Check the water pressure.

• Clean the debris filter.

• Make sure the drainage hose is installed correctly.

Laundry load is unbalanced; loosen any tangled laundry.

If only one item of clothing needs washing, such as a bathrobe or jeans, the final spin result might be unsatisfactory and an "E4" error message will be shown in the display window.

Before contacting After-Sales service:

1.Try to remedy the problem (See "Troubleshooting" on this page).

2.Restart the programme to see if the fault is repeated.

3.If the malfunction persists, call After-sales service and specify.

14 SAMSUNG Washing Machine Owners Instructions

Image 16
Contents Washing Machine Owner’s Instructions Before using the appliance Safety PrecautionsSafety instructions Table of Contents Unpacking the Washing machine Installing the Washing MachineOverview of the washing machine Adjusting the leveling feet Connecting the water supply hoseOptionSelecting a location Removing the shipping boltsConnecting the water supply hose Positioning the drain hoseWiring lnstructions Plugging in the machineWashing a Load of Laundry Overview of the control panelStart/Pause button Washing for the first time Using Hot WaterPutting detergent in the washing machine Washing clothes using Fuzzy Logic When the cycle is finishedUsing delay start Setting prewashWashing clothes manually Washing tips and hints Fabric TypeRepairing a frozen washing machine Cleaning the exteriorCleaning the detergent drawer and recess Maintaining the Washing MachineCleaning the water hose mesh filter Cleaning the debris filterTo do this Troubleshooting Problems and solutionsUnderstanding error messages Before contacting After-Sales serviceProgramme Chart PRO- Max Gram load kgAppendix Fabric care chartElectrical warnings Protecting the environment SpecificationDeclaration of conformity Case the Need for Servicing Arises