installation & maintenance
ASSEMBLING THE RAT PROTECTION PANEL
1.It is easier engaging the shutter when the set is lifted up a little, as shown in the figure below.
2.Insert the shutter completely through the engagement hole from the back.
HOW TO CONNECT THE DRAIN HOSE
IN CASE OF PUMP-DRAINED WASHER
•Attach the drain hose to the rear of the washer. Install the clamp on the drain hose and tighten to prevent leakage of
water.
•Install the drain hose in the position of about 90~100cm
above the ground.
90~100cm
18_Installation & maintenance