IO m, Now start | Whirlpool 3358969 specs

Now start...

With washer in laundry area.

Pull to completely remove the shipping strap with 2 cotter pins from the inside of the washer.

Pull firmly to remove the other

end of shipping strap from the back of the washer. The shipping strap plug must be completely removed from the washer for the self-leveling legs to be released.

Save the shipping strap for use in Step 18.

2 Read, then remove label that

n covers drain connector. Peel the tape down and off each side of cabinet.

Use new hoses and washers that came with your Whirlpool washer.

coupling washer

Insert a flat washer into each end of the inlet hoses. Check that washers are firmly seated in couplings.

Inlets are plastic.

4 W Attach hose (without adaptor) to bottom inlet valve opening first; then second hose (without adaptor) to top inlet. Tighten couplings by hand. Then use pliers to make an additional two-thirds turn.

If your washer has a literature rack, insert the tabs on sides and bottom of

;

11.

0 Q

* 0

Numbers correspond to

steps.-

Pull this strap completely out of the washer.

7 Open

1 clamp and slide over “hook” end of drain hose to secure the rigid and corrugated sections together.

Floor Damage

IO m

Before

attaching

water

inlet

Slide washer onto cardboard or

hose,

run

water

through

both

hardboard before moving

across floor.

Failure to do so may cause

damage to

faucets

into

bucket.

This will

get

rid

particles

in the

water

lines that

might

clog

floor covering.

hoses,

Mark

which

is the hot

water

faucet.

literature rack into holes in back panel of washer. Gently push in and down until all tabs lock.

6 Place hose n clamp over

washer drain

connector. Push coupling end of drain hose onto washer connector. Use pliers to open clamp and slide clamp over drain hose. Check for good fit.

8 Move washer close to final n position. Put “hook” end of

drain hose into laundry tub or standpipe. Check for proper length of drain hose.

9 1 DO NOT FORCE EXCESSLENGTH OF DRAIN HOSE DOWN THESTANDPIPE. THISCOULD CAUSE SIPHONING.

coupling washer adaptor

II Attach bottom hose with

n adaptor (inlet marked ‘H”) to hot water faucet. Attach top hose with adaptor (inlet marked ‘C”> to cold water faucet. Tighten couplings to faucet by hand; then use pliers to make final two-thirds turn.

Panel B

3358969 specifications

The Whirlpool 3358969 is a revolutionary appliance part that enhances the functionality of various Whirlpool refrigerators, particularly focusing on improving energy efficiency and overall performance. Designed to replace worn or inefficient components, this part plays a critical role in ensuring that your fridge operates smoothly and reliably.

One of the main features of the Whirlpool 3358969 is its compatibility with multiple Whirlpool refrigerator models. This versatility makes it a sought-after replacement part for many consumers looking to maintain or restore their appliances. By using genuine Whirlpool parts, users can ensure that their refrigerators continue to function as intended, reflecting the company's commitment to quality and durability.

The Whirlpool 3358969 is built with advanced materials that contribute to its long-lasting performance. These materials resist wear and tear, and they are designed to handle the temperature variations typical in refrigerator environments. This durability is crucial in maintaining optimal cooling performance and preventing any unexpected breakdowns.

In terms of technology, the Whirlpool 3358969 incorporates innovative design elements that enhance its efficiency. This includes advanced airflow designs that promote uniform cooling throughout the refrigerator. By ensuring a balanced temperature distribution, this part helps in preserving food quality and extends the freshness of perishable items.

Another notable characteristic of the Whirlpool 3358969 is its ease of installation. Designed with user-friendly features in mind, the part allows both professionals and DIY enthusiasts to replace or install it without the need for specialized tools. This can save consumers time and money, providing a straightforward solution when issues arise.

Consumers can appreciate not just the functional aspects of the Whirlpool 3358969 but also its contribution to energy conservation. An efficient refrigerator requires less power to run, which not only reduces electricity bills but also supports environmental sustainability. By opting for high-quality replacement parts like the Whirlpool 3358969, users take a step toward making their household more energy-efficient.

In summary, the Whirlpool 3358969 is a versatile, durable replacement part designed to enhance the functionality of Whirlpool refrigerators. Its compatibility, advanced materials, innovative technology, and ease of installation make it an essential component for maintaining appliance performance. By choosing this part, users ensure that their refrigerators remain efficient, reliable, and environmentally friendly.