Understanding the control panel
Here I’m in command
Making the right choice is important. And it’s easy. | D | |
| C | F |
|
|
|
BEA
Programme selector knob Use this knob to select the wash programme.
Turn this knob clockwise only. To select a programme, you should turn the knob so that the symbol/number of the desired programme is in line with the pointer on the knob.
Now press on/off button E (position I), pilot lamp F will start flashing.
After 5", the setting will be accepted, pilot lamp F will stop flashing (staying lit) and the wash cycle will begin.
Should you wish to interrupt the programme in progress or set a new one, select one of the symbols 
(Stop/Reset) and wait 5" : when the cancellation has been accepted, pilot lamp F flashes, and you can then turn the appliance off.
After the wash cycle has been set and accepted by the washing machine, turning the knob will have no effect (except for when it is on position 
Stop/ Reset).
Detergent dispenser
It is divided into three compartments:
1.Detergent for
2.Detergent for the main cycle wash;
3.Fabric conditioner.
Slow spin
Use this button to reduce the spinning speed from 1600 to 800 rpm for the cotton and linen programmes and from 900 to 800 rpm for the synthetic fabrics programmes.
ECO ULTRA
Reduces water consumption during the rinse cycles. We recommend that you use this function only with small laundry loads, dosing the detergent proportionally.
On-off
When button E is pressed, the washing machine is switched on, when it is not the machine is switched off.
Turning the appliance off does not cancel the selected programme.
The
Lamp F flashes when the appliance is switched on and awaiting a programme to be set. A steady light means the appliance has accepted the selected programme.
Rinse Hold
This function (represented by the symbol ) interrupts the wash programme, keeping the washing soaking in water before draining. It is only enabled in programmes for synthetic fabrics, silk and curtains. It is very useful, because it prevents delicate and synthetic fabrics from creasing (for example, when you cannot take the washing out at the end of the wash cycle but only a few hours later).The programme can be completed by turning knob A one notch. In the case of synthetic fabrics, should you prefer draining rather than a spin cycle, turn knob A until you have selected the number 17 (Drain).
3
2
1
The detergent dispenser is here. 
3Instructions for installation and use