Indesit IWDE 7168 manual First wash cycle, Correspond with the coloured markings iden

	As the colours of the wires in the lead may not
GB
	correspond with the coloured markings iden-
	tifyng the terminals in your plug, proceed as
	follows:
	Connect Green & Yellow wire to terminal
	marked E or	or coloured Green or Green &
	Yellow.
	Connect Brown wire to terminal marked L or
	coloured Red.
	Connect Blue wire to terminal marked N or
	coloured Black.
	If a 13 amp plug (BS 1363) is used it must be
	fitted with a
	13 amp fuse, either in the plug or adaptor or
	at the distribution board.
	If you are in any doubt on the electrical supply
	to your machine, consult a qualified electrician
	before use.
	How to connect an alternative plug:
	The wires in this mains lead are coloured in
	accordance with the following code:
	BLUE		NEUTRAL (N)
	BROWN		LIVE (L)
	GREEN & YELLOW		EARTH (E)
	GREEN &
	YELLOW
	BROWN	13 ampere fuse
	BLUE	CROSS-BAR
		CORD GRIP

Disposing of the appliance:

When disposing of the appliance please re- move the plug by cutting the mains cable as close as possible to the plug body and dispo- se of it as described above.

!The washing machine should not be instal- led in an outdoor environment, not even when the area is sheltered, because it may be very dangerous to leave it exposed to rain and thunderstorms.

!When the washing machine is installed, the mains socket must be within easy reach.

!Do not use extensions or multiple sockets.

!The power supply cable must never be bent or dangerously compressed.

!The power supply cable must only be repla- ced by an authorised serviceman.

Warning! The company denies all liability if and when these norms are not respected.

The first wash cycle

Once the appliance has been installed, and before you use it for the first time, run a wash cycle with detergent and no laundry, setting the 90°C programme without a pre-wash cycle.

4