Personalisation, Setting the temperature

Personalisation

Setting the temperature
Setting the temperature							GB
Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).							GB

The temperature may be lowered, or even set to a cold wash . The washer-dryer will automatically prevent you from selec-
ting a temperature which is higher than the maximum value set for each wash cycle.
Setting the drying cycle	Table of Drying times (guideline values)
Setting the drying cycle
Turn the DRYING knob to select the desired drying option.	Fabric	Load type	Max.	Cupboard	Henger	Iron
There are two options:	type	Load type	load (kg)	dry	dry	dry
	type		load (kg)	dry	dry	dry

A - Based on time: From 40 minutes to 180.		Clothing of diffe-
B - Based on the desired laundry dryness level:	Cotton	rent sizes, Terry	5	180	170	140
B - Based on the desired laundry dryness level:		towels
Iron dry : suitable for clothes which will need ironing		towels


afterwards. the remaining dampness softens creases,	Synthe-	Sheets, Shirts, Py-	3	140	120	100
making them easier to remove.	tics	jamas, socks, etc.	3	140	120	100
making them easier to remove.	tics	jamas, socks, etc.
Hanger dry : ideal for clothes which do not need to be
Hanger dry : ideal for clothes which do not need to be
dried fully.

Cupboard dry : suitable for laundry which can be put back in a cupboard without being ironed.

If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this point, follow the instructions provided for a “Drying only” cycle. Repeat this procedure for the remainder of the load.

Drying only

Use the cycle selector knob to select a drying cycle (11-12) in accordance with the type of fabric. The desired drying level or time may also be set using the DRYING knob.

Functions

The various wash functions available with this washer-dryer will help to achieve the desired results, every time. To activate the functions:

1.Press the button corresponding to the desired function;

2.the function is enabled when the corresponding indicator light is illuminated.

Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle.

Delay timer

To set a delayed start for the selected programme, press the corresponding button repeatedly until the required delay period has been reached. When this option is enabled, the symbol lights up on the display. To remove the delayed start option press the button until the text “OFF” appears on the display.

!This option is enabled with all programmes.

Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled

cotton and synthetic fabrics (refer to the “Table of wash cycles”). “” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.