Sears 93751, 93701 warranty Washer, Cycle Selections, Water Level, Heavy, Water Temperature

Use

	Washer			and Water Level	for each	load.
				Remember--Select	Water	Temperature O
WASH TEMPERATURE		WATER LEVEL		SOAK/	HEAVY		COTTON
				PREWASH			STURDY
					OFF SOIL	MEDIUIVl
						LIGHT
				PREWASH
	COLD		MEDIUM
	LOW_\		HIGH	SOAK			÷
HOT__	WARM						)FF
							MEDIUM
							IGHT

KNITS/ DELICATE

MEDIUM

SOIL

• SPIN ONLY PULL - START PUSH - STOP

USING THE WASHER

1.Prepare and sort laundry as directed on page 4.

2.Measure correct amount of

laundry aids and add to empty tub. (Refer to pages 6 and 7 for laundry products and water hardness information.)

3.If desired, add diluted liquid bleach as directed in Bleach Dis-

penser section on page 5. Do not

pour bleach directly onto wash load.

4.Add wash load to tub.

5.Choose corttrol settings

according to type of load and amount of soil.

•WATER TEMPERATURE

Select desired wash/rinse

temperature combination. The washer will not fill if the knob

is pointing between 2 settings. See page 10 for suggested settings.

•WATERLEVEL

Select water level that is best for size of load washed. Water should cover top of wash load.

6.Push cycle selector knob in and turn right (clockwise) to desired wash cycle and time. For best results, fl311ow fabric

care labels for washing instructions.

7.Turn on hot and cold water faucets.

8.Start washer by closing lid and pulling out timer knob. Washer will operate with the lid open. However, it will not go into spin cycle unless lid is closed. To

stop washer or change cycle, push in Cycle Selector knob and

turn it clockwise to desired setting.

9.Add fabric softener, if desired, to final rinse. Follow manufac-

turer's directions on product label. (If a fabric softener dispenser is available, follow directions on page 5.)

10.After the last spin cycle, wait approximately 1 to 2 minutes for the safety lid lock to release. Remove wash load for drying.

CYCLE SELECTIONS

COTTON STURDY This cycle provides up to 18 minutes of normal agitation, a spray rinse in the first spin followed by a deep rinse and 8 minutes of fast spin with a final spray rinse. Set selector according to amount of soil in each load.

PERM PRESS This cycle pro- vides up to 12 minutes of normal

agitation followed by a 1 minute cool down rinse to reduce wrinkling in the

first spin, a deep rinse and 6 minutes of slow spin with a final spray rinse. The slower spin speed minimizes wrinkling during the final spin.

KNITS/DELICATE This cycle provides 6 minutes of gentle agita- tion followed by a spray rinse in the first spin, a deep :5nse and 4 minutes of slow spin with a spray rinse.

SOAK This cycle can be used to treat heavily soiled or stained items that may require raore than one wash. It provides 2 minutes of normal agitation followed by 12 minutes of soak, 2 minutes of normal agitation and 6 minutes of fast spin. Use recommended an_ounts of detergent and bleach or so_&ing agent for one wash cycle. (See package labels for amounts.) Cold water is used in this cycle.

NOTE: The ?;oak cycle should always be followed by a wash cycle

using recommended amount of detergent.

PREWASH The Prewash portion of the Soak cycle can be used alone to help remove protein-based stains such as milk, grass ancLblood or to loosen

soils before washing. Prewash

provides 2 minute:; of normal agitation followed by 6 minutes of fast spin.

Use recommerded amount of detergent for one wasfi cyc_le. _ater temperature will be the same as wash water temperature selected.

[ACAUTIONI Using hot water in Prewash can set stains. See Stain Removal chart OrLpage 7.

Page 9