troubleshooting
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY | MEANING | SOLUTION | |
|
|
| |
tS | The Thermistor resistance is very low | Try restarting the cycle. | |
| or high. | If the problem continues call for service. | |
tO | |||
|
| ||
|
|
| |
dO | Running the dryer with door open | Close the door and then restart. | |
|
| If the problem continues call for service. | |
|
|
| |
dF | Invalid state for more than 256 | Call for service. | |
| milliseconds |
| |
|
|
| |
bE | Button stuck for more than 75secs | Make sure a button is NOT being pressed | |
|
| continuously. Try restarting the cycle. | |
|
| If the problem continues call for service. | |
|
|
| |
oD | Invalid Dry time | Call for service. | |
|
|
| |
hE | Invalid heating Temp when running | Call for service. | |
| the dryer |
| |
|
|
| |
Et | EEPROM is not communicating | Try restarting the cycle. | |
| properly | If the problem continues call for service. | |
|
|
| |
FE | Invalid power source Frequency | Try restarting the cycle. | |
|
| If the problem continues call for service. | |
|
|
|
For any codes not listed above, call
28_ Troubleshooting