RACK DRY
Installing the drying rack
1.Open the Dryer door.
2.Position the drying rack in the tumbler, placing the rear legs in the two recessed areas of the dryer’s back wall.
3.Place the front lip of the drying rack on top of the lint filter.
4.Place the items to be dried on the rack, leaving space between them so air can reach all surfaces.
5.Close the Dryer door.
6.Use the Time Dry cycle. Select the time according to the moisture and weight of the items. Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS | SUGGESTED TEMP. SETTINGS |
|
|
Washable sweaters | Low or Extra Low |
(block to shape and lay flat on rack) |
|
|
|
Stuffed toys | Low or Extra Low |
(cotton or polyester fiberfilled) |
|
|
|
Stuffed toys | Air Fluff |
(foam or |
|
|
|
Foam rubber pillows | Air Fluff |
|
|
Sneakers | Air Fluff or Heat (Extra Low) |
|
|
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and WARNING lead to a fire hazard.
02 Operating Instructions, Tips