Beko WDA 91440 W user manual User’s Manual 61 / EN

Page 61

Troubleshooting

Drying process lasts long.

•Pores of the Air inlet filter in front of the machine might be clogged. >>> Wash the Air inlet filter with lukewarm water.

•The Air inlet filter in front of the machine might be blocked. >>> Remove everything, if any, that is blocking ventilation in front of the Air inlet filter.

•Ventilation may be inadequate due to the very small area of installation. >>> Open the doors and windows to avoid too much increase in the ambient temperature.

•Excessive laundry was loaded in. >>> Do not overload the Washer-Dryer.

•Laundry may not have been spun adequately. >>> Have the Washer-Dryer perform spin in a higher spin speed during washing step.

•Tap is turned off. >>> Open the taps.

Laundry remains wet at the end of drying.

•Improper programme might have been used for the laundry type >>> Select a proper programme for the type of the laundry by checking the maintenance tags on the clothes or use time programmes additionally.

•Pores of the Air inlet filter in front of the machine might be clogged. >>> Wash the Air inlet filter with lukewarm water.

•Excessive laundry was loaded in. >>> Do not overload the Washer-Dryer.

•Laundry may not have been spun adequately. >>> Have the Washer-Dryer perform spin in a higher spin speed during washing step.

Machine does not turn on or the programme does not start.

•Power cable might not be plugged in. >>> Make sure that the power cable is plugged in.

•Programme might not be set or Start / Pause / Cancel button might not be pressed. >>> Make sure that the programme has been set and the machine is not in Pause mode.

•Ensure drain hose height and position is correct see “Installation”

•Child lock might be enabled. >>> Deactivate the Child Lock.

Laundry is shrunk, yellowed, felted or damaged.

•Improper programme might have been used for the laundry type >>> Select a proper programme for the type of the laundry by checking the maintenance tags on the clothes or use time programmes additionally. Laundry not suitable for drying should not be dried.

Drying cannot be performed

•Laundry might not be dry or drying function has not been enabled. >>> Check if drying function is also selected after the selected washing programme.

Loading door cannot be opened.

•Loading door of the machine may not be opened due to safety reasons. >>> If "wait to cool down to open...." warning is displayed, machine will keep the loading door locked for your safety until it cools down. You can accelerate cooling by running any 10-minute drying programme.

(*)Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

(**) Regular drum cleaning is not applied. >>> Clean the drum regularly. See, 6.2

CAUTION

A¾¾ If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.

User’s Manual

61 / EN

 

 

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Washer-Dryer Please read this manual first ¾¾ Precautions to be takenFirst use OverviewOperating the product Starting the Programme Loading door lock End TimeElectrical safety General safetyUsed Can get damagedConditions ¾¾ Controls should not be tampered withImportant instructions for safety and environment Their producers Recommended by their manufacturersDamaged ProcessesCompliance with Weee Directive Childrens safetyPackage information Be available to operate the appliance properlyOverview Your washer-dryerYour washer-dryer Package Contents Product Your washer-dryer Technical specificationsAppropriate installation location InstallationRemoving the transportation locks Installation Removing packaging reinforcementWall when it is installed under-counter Installation Undercounter usePressure is higher Installation Connecting water supplyInstallation Connecting to the drain Installation Adjusting the feet Installation Electrical connection Especially on stairs. Failure to do so may cause injury Transportation of the productAlways obey the instructions given on the garment tags Sorting the laundryThings to be done for energy saving Preparation Preparing laundry for washingCorrect load capacity Preparation First useUse an anti-limescale suitable for the washing machines Production. It is not harmful for the productPreparation Loading the laundry Using detergent and softenerPreparation Adjusting detergent amountDrum in future washings Using gel and tablet detergentDo not use bleaching agent and detergent by mixing them Tips for efficient washing Using limescale removerHeavily Soiled Normally SoiledPreparation Tips for efficient drying Control panel Operating the productPreparing the machine Operating the product Display symbolsWash Programme selection Operating the product Washing Programmes Synthetics Operating the productWoollens Cottons Eco34 / EN Shirts Xpress Super ShortOperating the product Temperature selection Operating the product Selecting the spin speed Operating the product Drying Programmes ¾¾ For dry weights of laundry, see , StepSynthetic Dry Kg Wash & Dry Operating the product Washing and Drying ProgrammesDrying clothes Anti Allergy Wash & Dry For washing Operating the product Programme and consumption tableProgramme and consumption table For drying Information for testing institutionsProgramme with 9 kg load Operating the product Auxiliary function selection Not adjustable appears on the display for ... secondsExtra Rinse Drying StepsAnti Crease Time display Operating the product End Time Loading door lock Operating the product Starting the ProgrammeChanging the selections after Programme has started Press Start / Pause button to start the Programme¾¾ The selected Programme starts anew Child LockHas stopped To activate the Child LockEntering the Settings menu Cancelling the ProgrammeEnd of Programme On the display50 / EN Your machine is equipped with a Standby Mode Memory Favourite Programme settingCleaning the detergent drawer Maintenance and cleaningUser’s Manual 53 / EN Cleaning the body and control panel Maintenance and cleaning Cleaning the air suction filterDraining remaining water and cleaning the pump filter Maintenance and cleaning Cleaning the water intake filtersClose the taps Turn the pump filter to take it out Maintenance and cleaningWater in the machine Programme cannot be started or selectedThere is water leaking from the bottom of the machine Machine does not fill with waterTroubleshooting Laundry became stiff after washing Colour of the clothes fadedWater pressure is low. Check the water pressure User’s Manual 61 / EN Page Washing Machines ServiceWashing Machines, Dishwashers and Electric Cookers Guarantee

WDA 91440 W specifications

The Beko WDA 91440 W is a versatile and efficient washer-dryer that combines advanced technology with user-friendly features to cater to modern laundry needs. Designed for homes where space is at a premium, this appliance delivers both washing and drying capabilities in a single, compact unit.

One of the standout features of the Beko WDA 91440 W is its 9 kg washing capacity, allowing users to tackle large loads of laundry at once. This is particularly beneficial for families or individuals with busy lifestyles, as it reduces the number of cycles required to complete laundry tasks. The drying capacity is 5 kg, making it suitable for everyday laundry.

Equipped with a variety of wash programs, the Beko WDA 91440 W offers tailored options to effectively clean different fabric types, such as cotton, synthetics, and delicate items. The machine includes a Quick Wash program, enabling users to refresh lightly soiled clothes in just 28 minutes, making it a perfect solution for those on the go. Additionally, the Woolmark Blue certification assures users that their delicate wool garments will be treated with care during the washing process.

Energy efficiency is another hallmark of this model. The Beko WDA 91440 W boasts an impressive energy rating, helping to minimize electricity consumption and reduce utility bills. This feature aligns with modern environmental standards, appealing to eco-conscious consumers looking to lower their carbon footprint.

The machine also incorporates Beko’s SteamCure technology, which uses steam to help reduce creasing, making ironing easier and more efficient. Furthermore, the ProSmart Inverter Motor contributes to the quiet operation of the washer-dryer, ensuring a peaceful home environment even during laundry cycles.

In terms of design, the Beko WDA 91440 W features a sleek and modern aesthetic, available in a crisp white finish. Its easy-to-use digital display and control panel allow for straightforward operation, providing users with the convenience they seek.

With its robust features, innovative technologies, and energy-efficient design, the Beko WDA 91440 W washer-dryer is an excellent choice for anyone looking to simplify their laundry routine while conserving space and energy.
Top Page Image Contents