Before you call for service…

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

Troubleshooting Tips

Save time and money! Review the charts on the following pages, or visit www.GEAppliances.com. You may not need to call for service.

AUTOTEMP	Possible Causes	What To Do
AutoTemp cold wash	The washer is in a cold rinse cycle	• This is normal. The AutoTemp feature is designed not
temperature is incorrect		to activate during a cold rinse cycle so that the coldest
		water available is used.

(Review AutoTemp	All the water in the water heater	• Wait until the water in the water heater is heated to the
in the About washer	has been used	correct temperature.
features section)

WATER	Possible Causes	What To Do

Too many suds	Type of detergent	• Switch to a lower sudsing detergent brand and follow
		instructions on package.

	Very soft water	• Try less detergent.

	Too much detergent	• Measure your detergent carefully. Use less soap if you
		have soft water, a smaller load, or a lightly soiled load.

Water leaks	Fill hoses or drain hose is	• Make sure hose connections are tight at faucets and
	improperly connected	rubber washers are installed. Make sure end of drain hose
		is correctly inserted in and secured to drain facility.

	Household drain may	• Check household plumbing. You may need to call a
	be clogged	plumber.

	Constant water pressure	• Tighten hoses at the faucets and turn the water off after
	to the fill hoses at the	each use.
	water source	• Check condition of the fill hoses; they should be
		• Check condition of the fill hoses; they should be
		replaced every 5 years.

	Using too much detergent	• Use less detergent. Use less soap if you have soft water, a
	in washer	smaller load, or a lightly soiled load.

Water temperature	Control is not set properly	• Check water temperature control and adjust.
is incorrect

	Water supply is turned off	• Turn both hot and cold faucets fully on and make sure
	or improperly connected	hoses are connected to correct faucets.

	Water valve screens are	• Turn off the water source and remove the water
	stopped up	connection hoses from the upper back of the washer.
		Use a brush or toothpick to clean the screens in the
		machine. Reconnect the hoses and turn the water back on.

	House water heater is	• Make sure house water heater is delivering water
	not set properly	at 120°–140°F (48°–60°C).

Water pumped out	Lid lifted or cycle was put in	• Reset cycle.
before cycle is	pause for over 24 hours
complete

Water won’t drain	Drain hose is kinked or	• Straighten drain hose and make sure washer is not sitting
	improperly connected	on it.
		• Top of drain outlet should be less than 8 ft. (2.5 m)
		above floor.

S4200, WASE5210 specifications

The GE WLE4000, WASE5210, WBSE3120, WWSE5200, and WCSE4160 are part of GE's exceptional lineup of advanced energy management systems, offering unique features and technologies tailored for diverse applications in the field of industrial and commercial power systems.

Starting with the GE WLE4000, this model is designed as a compact solution for energy distribution and management. It offers advanced metering capabilities and real-time data analytics, allowing users to monitor energy consumption effectively. The WLE4000 features a user-friendly interface, making it easy to set up and manage energy use across different operations. Its robust design and flexibility enable integration with various existing infrastructure.

Next up is the WASE5210, which stands out for its adaptability and scalability. This system is engineered with advanced communication technologies, including IoT capabilities, facilitating seamless integration into modern smart grid applications. The WASE5210 employs machine learning algorithms to optimize energy usage and improve operational efficiencies. Its modular design allows for easy expansions or upgrades depending on the changing energy demands.

The WBSE3120 model specializes in substation automation, offering features such as fault detection, location, and isolation. Utilizing cutting-edge cybersecurity protocols, the WBSE3120 ensures data integrity and protection against external threats. With its real-time processing capabilities, it enhances decision-making processes, enabling quicker responses to electrical faults.

The WWSE5200 is engineered specifically for renewable energy applications. It supports advanced functions such as grid connectivity and energy storage management, making it a perfect choice for solar and wind energy projects. The system is equipped with sophisticated power quality monitoring tools that allow users to maintain optimal operational standards, reducing the risk of outages and inefficiencies.

Finally, the WCSE4160 model is aimed at enhancing system reliability and operational performance within industrial environments. Its advanced diagnostic tools and monitoring capabilities provide actionable insights into system health, thereby reducing downtime and maintenance costs. The WCSE4160 also incorporates smart grid technologies, allowing for advanced demand response strategies tailored to user requirements.

In conclusion, GE's WLE4000, WASE5210, WBSE3120, WWSE5200, and WCSE4160 models represent the forefront of energy management technology. Each model brings its own set of features tailored to different segments, promoting efficiency, sustainability, and advanced operational capabilities in diverse energy settings.