Electrolux EWN 16781 W Altering an option or a running programme, Interrupting a programme

16electrolux use

The availability of these soil level icons change according to the type of fabric as shown in the following chart:

Fabric					Soil Level
Cottons
	90°C		X	X	X	X	X	X
	60°C		X	X	X	X	X	X
	50°C		X	X	X	X	X	X
	40°C		X	X	X	X	X	X
	30°C		X	X	X	X	X	X
		(cold)	X	X	X	X	X	X
Synthetics
	60°C			X	X	X		X
	50°C			X	X	X		X
	40°C			X	X	X		X
	30°C			X	X	X		X
		(cold)		X	X	X		X
Delicates
	40°C			X	X	X		X
	30°C			X	X	X		X
		(cold)		X	X	X		X

Altering an option or a running programme

It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washing machine by pressing the Start/Pause button.

(Only the Time Manager option cannot be modified after the programme has started. )

Changing a running programme is possible only by resetting it. Turn the programme selector dial to O and then to the new programme position. The washing water in the tub will not emptied out. Start the new programme by depressing the Start/Pause button again.

Interrupting a programme

Depress the Start/Pause button to interrupt a programme which is running, the corresponding light starts to flash. Depress the button again to restart the programme.

Cancelling a programme

Turn the selector dial to O to cancel a programme which is running. Now you can select a new programme.

Opening the door after the programme has started

First set the machine to pause by pressing the Start/Pause button.

If the “door” icon desappears on the display, the door can be opened.

If the “door” light does not goes off, this means that the machine is already heating, that the water level is above the bottom edge of the door or that the drum is turning. In this case the door can not be opened.

If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial to O.

After about 3 minutes the door can be opened (pay attention to the water level and temperature!).