|
| use electrolux 13 |
Select the Delay start | The Delay Start can not be selected | |
| with Drain | programme. |
2h 4h 8h | Programme progress display | |
Before you start the programme, if you wish to delay the start, press the Delay Start button repeatedly, to select the desired delay. The relevant light illuminates.
This button makes it possible to delay the starting of the washing programme by 2, 4, and 8 hours.
You must select this option after you have set the programme and before you press the Start/Pause button.
You can cancel the delay time at any moment, before you press the Start/Pause button.
If you have already pressed the Start/Pause button, and you wish to cancel the delay time, proceed as follows:
•set the washing machine to PAUSE by pressing the Start/Pause button;
•press the Delay Start button once, the light relevant to the selected delay goes off.
•press the Start/Pause button again to start the programme.
Important!
•The selected delay can be changed only after selecting the washing programme again.
•The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing the Start/Pause button and then wait about 2 minutes. After you have closed the door, press the Start/Pause button again.
Wash
Door
End cycle
After having pressed the Start/Pause button, the “wash” 
pilot lights comes on.
When the pilot light “wash” comes on this means that the machine is performing the washing cycle.
The “door” 
pilot light indicates if the door can be opened:
•light on: the door cannot be opened. The appliance is running.
•light off: the door can be opened. The washing programme is finished.
•flashing light: the door is opening.
When the programme has finished, the
“End” 
pilot light comes on.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washing machine by pressing the Start/Pause button.
The options Daily, Light and Quick cannot be modified after the Start/Pause has been pressed.
Changing a running programme is possible only by resetting it. Turn the programme selector dial to “O” and then to the new programme position. The washing water in the tub will not