Wash cycles and options
Table of wash cycles
cycles |
| Max. | Max. |
| Detergents | Max. load (kg) | Cycle | |||
|
|
|
| |||||||
|
|
|
|
|
|
|
| |||
Wash | Description of the wash cycle | temp. | speed | Drying |
|
|
|
| duration | |
| Fabric |
| Eco | |||||||
| (°C) | (rpm) |
|
|
| |||||
|
| Wash | Normal |
| ||||||
|
|
|
| softener | Time |
| ||||
|
|
|
|
|
|
|
|
|
| |
| Daily |
|
|
|
|
|
|
|
| |
1 | White Cotton: extremely soiled whites. | 90° | 1600 | l | l | l | 7 | - | The | |
1 | White Cotton (1): heavily soiled whites and resistant colours. | 60° | 1600 | l | l | l | 7 | - | ||
1 | White Cotton (2): heavily soiled whites and delicate colours. | 40° | 1600 | l | l | l | 7 | - | duration | |
| ||||||||||
2 | Cotton: heavily soiled whites and resistant colours. | 60° | 1600 | l | l | l | 7 | 3,5 |
| |
3 | Coloured Cotton (3): lightly soiled whites and delicate colours. | 40° | 1600 | l | l | l | 7 | 3,5 | of | |
4 | Synthetics: heavily soiled resistant colours. | 50° | 800 | l | l | l | 3 | 2 | ||
the | ||||||||||
| Special |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| wash | ||
5 | Wool: for wool, cashmere, etc. | 40° | 600 | - | l | l | 1,5 | - | ||
| ||||||||||
6 | Silk/Curtains: for garments in silk and viscose, lingerie. | 30° | 0 | - | l | l | 1 | - | cycles | |
| Sport |
|
|
|
|
|
| - | ||
7 | Jeans | 40° | 800 | l | l | l | 3 |
| ||
|
|
|
|
|
|
|
|
| can | |
8 | Sport Intensive | 30° | 600 | - | - | l | 3 | - | ||
| ||||||||||
9 | Sport Light | 30° | 600 | - | l | l | 3 | - | be | |
|
|
|
|
|
|
| Max. 2 |
| ||
10 | Special Shoes | 30° | 600 |
| l | l | - | checked | ||
- | pairs | |||||||||
| ||||||||||
|
|
|
|
|
|
|
|
| ||
| Dry |
|
|
|
|
|
|
|
| |
11 | Cotton | - | - | l | - | - | 5 | - | on | |
12 | Synthetics | - | - | l | - | - | 3 | - | ||
the | ||||||||||
|
|
|
|
|
|
|
|
| ||
13 | Express Wash & Dry | 30° | 1600 | l | l | l | 0,5 | - | ||
display. | ||||||||||
|
|
|
|
|
|
|
|
| ||
| Rinse | - | 1600 | l | - | l | 7 | - | ||
| Partial wash cycles |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
| Spin | - | 1600 | l | - | - | 7 | - |
| |
| Drain | - | 0 | - | - | - | 7 | - |
|
The information contained in the table is intended as a guide only.
For all Test Institutes:
1)Test wash cycle in compliance with regulation EN 50229: set wash cycle 1 with a temperature of 60°C.
2)Long wash cycle for cottons: set wash cycle 1 with a temperature of 40°C.
3)Short wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.
GB
Wash options
Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled cotton and synthetic fabrics (refer
to the "Table of wash cycles"). “” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.
This function may not be used in conjunction with cycles 1, 5, 6, 7, 8, 9, 10, 11, 12, 13, , , .
Intensive Wash
Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this function offers a high- performance wash.
This function may not be used in conjunction with cycles 5, 6, 7, 8, 9, 10, 11, 12, 13, , , .
Easy iron
By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the
for the EASY IRON and START/PAUSE options will flash (the first one green, the second orange).
To end the cycle, press the START/PAUSE button or the EASY IRON button.
For the 6 wash cycle, the machine will end the cycle while the laundry is soaking and the EASY IRON and START/PAUSE indicator lights will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button.
This function may not be used in conjunction with cycles 5, 8, 9, 10, 11, 12, 13, , .
Note: If you also want to run the drying cycle, this option is enabled only if combined with level “A1” (Iron dry).
Delay Timer
To set a delayed start for the selected cycle, press the corresponding button repeatedly until the required delay period has been reached. When this option is enabled, the corresponding indicator light will remain lit. To remove the delayed start setting, press the button until the text "OFF" appears on the display.
This option can be used in conjunction with all cycles.
9