Frigidaire 137227300 Cycle Selection, Energy Saving Tips, Automatic Perm Press/Delicates Cycle

	COOL	START			AUTOMATIC
	DOWN				PERM PRESS	START		TEMPERATURE
	20
								KNITS/DELICATES	PERM PRESS
	30				PRESS SAVER /		ON	LOW HEAT	MEDIUM HEAT
					FABRIC SENTRY
	40							AIR FLUFF	REGULAR
								NO HEAT	HIGH HEAT
	50			MORE DRY
	60
	70	COOL	LESS DRY		AUTOMATIC
TIMED DRY
		DOWN
					REGULAR

Cycle Selection

Turn cycle selector clockwise to desired cycle and setting.

Each cycle ends with a cool down period. The heat automatically turns off and the load continues to tumble for 5-10 minutes. This reduces wrinkling and makes items easier to handle during unloading.

Drying time varies depending on size and dampness of load, weight and fabric type. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time.

Automatic Perm Press/Delicates Cycle

This cycle is best for permanent press, knit and delicate items. Drying time is determined automatically at the temperature selection of your choice.

•Medium heat is suggested for permanent press items.

•Low heat is suggested for knit and delicate items.

If the dried load cannot be removed promptly, the cycle selector will advance to the Press Saver/Fabric Sentry

setting. Unheated tumbling continues during Press Saver/Fabric Sentry for approximately 30 minutes to help reduce wrinkling.

The cycle signal will sound briefly every 5 minutes as a reminder to remove the load.

Automatic Regular Cycle

This cycle is best for cotton items that can be tumble dried.

Drying time is determined automatically at the temperature selection of your choice. This cycle is best for items of similar fabric, weight and construction.

•For items requiring more drying time, set cycle selector on MORE DRY.

•For items requiring less drying time, set cycle selector on LESS DRY.

Timed Dry Cycle

This cycle provides up to 70 minutes of drying time at the temperature selection of your choice.

Energy Saving Tips

•Keep the lint screen clean and exhaust the dryer correctly.

•Sort laundry properly and select proper temperature and cycle settings. Choose an automatic dry cycle whenever possible for accurate drying time.

•Dry only full loads. Single items and small loads usually take longer to dry.

•Avoid overloading, adding wet items to a partially dry load, and overdrying.

•Dry one load after another to take advantage of a warm dryer.

•Opening the door needlessly causes warm air to escape, which prolongs drying time.

•If possible, use the dryer on low humidity days.

•Install the dryer in an area where the room temperature is at least 45°F (7°C).

P/N 137227300 (0905)