Frigidaire 137339000A important safety instructions Cycle Settings

Page 11

Cycle Settings

For best results

Follow the fabric care label instructions on items to be dried.

Appropriate drying Temperature, Dryness Level and Options will automatically be displayed for each cycle. The settings can be changed before the cycle is started.

Drying Temperature

To change the preset temperature, press the Temp button to scroll to the desired setting.

To protect your fabrics, not all temperatures are available with every cycle.

The temperature selected for the cycle will be remembered and recalled each time that cycle is selected in the future.

To return to factory settings, press these

two buttons at the

same time and

hold until the signal sounds.

NOTE

To change the Temperature after the cycle starts, press Pause, adjust the setting and press Start to resume the cycle.

Sanitize

Recommended for durable fabrics and towels. Use this selection to remove harmful bacteria from your clothing or other items where sanitization is desired.

NOTE

The Sanitize option has been certified by NSF International®, an independent third-party testing and certification organization dedicated to public health, safety and environmental protection.

NSF Protolcol P154

Sanitization Performance of

Residential Clothes Dryers

This option will kill 99.9% of bacteria with no carryover of bacteria between loads. A higher temperatures is required. Please check fabric care labels to prevent damage.

OPERATING INSTRUCTIONS

High

Recommended for most cotton fabrics.

Normal

Recommended for wrinkle free, easy care, lightweight fabrics and bulky loads.

Low

Recommended for delicate fabrics.

Air Dry

This setting (no heat) should only be used with a Timed Dry cycle to dry items containing feathers, down, foam rubber, plastics or rubber-like materials; to refresh clothing, stuffed animal, pillows or blankets; and to dust draperies.

Dry Level (Auto Dry)

To change the preset level, press the Dry Level button to scroll to the degree of dryness desired.

To protect your fabrics, not all dryness levels are available with every cycle. If a Dry Level is not appropriate for the cycle, it cannot be selected.

The Dry Level selected for the cycle will be remembered and recalled each time that cycle is selected in the future.

To return to factory settings, press these two buttons at the same time and hold until the signal sounds.

NOTE

To change the Dry Level after the cycle starts, press Pause, adjust the setting and press Start to resume the cycle.

Select the Normal dry level for most Auto Dry cycles.

Occasionally a load may seem too damp or over-dried at the end of the cycle. To increase drying time for similar loads in the future, select More. For loads requiring less drying time, select Less.

Select Damp for items you wish to partially dry before hanging or ironing.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Use &Care Record Your Model and Serial Numbers Important Safety InstructionsSave these instructions for future reference Product Record Electric Dryer Protect Children Features Prepare load for drying Operating InstructionsNormal Operating Sounds Operating Your DryerStart the cycle Select the appropriate cycle and settings for each loadUltra capacity Cycle SelectionBulky on select models Auto Dry CyclesHeavy on select models Heavy/Bulky on select modelsSpecialty Cycle Selection Cycle Settings Add Steam on select models Cycle OptionsEnergy Saver Chime Press & Hold on some models Delay StartWrinkle Release Line DryReversible Door Other FeaturesDrying Rack on select models Status DisplayUltra capacity Dryer Settings ChartReady steam system Mixed Delicates Inside Care and CleaningCommon Drying Problems Solutions to Common ProblemsOccurrence Possible Cause Solution Avoid Service ChecklistExclusions Major Appliance Warranty Information
Top Page Image Contents