Operating Instructions

Normal Operating Sounds

You may or may not hear the following sounds from your new dryer:

A.WATER VALVE (Steam models only.) The ﬂow of water is controlled by electric solenoids. During operation there may be a clicking sound as the valve opens and closes to control the water ﬂow.

B.SUSPENSION ROLLERS The dryer drum is supported by a set of suspension rollers. At times there may be a thumping or rolling sound when the dryer starts. This may happen if the dryer has not been in use for a period of time, or after a heavy load has remained in the dryer drum for an extended period, creating a temporary ﬂat spot on the edge of the roller. The noise should dissipate as the dryer operates and the ﬂat spots smooth out.

C.AIR FLOW SYSTEM Your dryer is equipped with a high volume air handling system. In some installations there may be some sounds associated with air movement throughout the dryer, including the air duct, blower, and exhaust system. This is normal and can vary with load size and type.

D.GAS VALVE (Gas models only.) The ﬂow of gas is controlled by electric solenoids. During operation there may be a clicking sound as the valve opens and closes to control the gas ﬂow.

E.GAS BURNER (Gas models only.) When the burner is operating, there may be sounds generated as the air ﬂow mixes with the gas ﬂame. This noise is normal and will only occur when the gas is ignited in the combustion tube.

CAUTION

Do not continue to use the dryer if you hear squeaking, grinding, rubbing or other unusual noises. This could be a sign of mechanical breakdown and lead to ﬁre or serious injury. Contact a qualiﬁed technician immediately.

Operating Your Dryer

WARNING

To reduce the risk of ﬁre, electric shock or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in this Use and Care Guide before operating your dryer.

(Mesh bag not included.)

1Prepare load for drying.

•Dry items of similar fabric, weight and construction in the same load.

•Separate dark items from light-colored items. Sepa- rate items that shed lint from those that attract lint.

•Check for stains which may not have been removed in washing. Repeat stain removal process and wash again before drying. Dryer heat may permanently set some stains.

•Place delicate or small items in a mesh bag.

•Be sure buckles, buttons and trim are heatproof and won’t damage the drum ﬁnish. Close zippers; fasten hooks and Velcro®-like fasteners. Tie strings and sashes to prevent snagging and tangling.