Description of the washer dryer
Control panel
GB
O N / O F F
button
Detergent dispenser | |
drawer | WASH |
| |
| CYCLE |
| SELECTOR |
MEMORY
button
CHILD
LOCK button
DRYING
button
DISPLAY
F U N C T I O N
buttons
SPIN SPEED
button
STA RT/
PAU SE
button with indicator light
buttons |
DELAYED START button
TEMPERATURE
button
Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”).
ON/OFF button 
: press this briefly to switch the machine on or off. The START/PAUSE indicator light, which flashes slowly in a green colour shows that the machine is switched on. To switch off the washer dryer during the wash cycle, press and hold the button for approximately 2 seconds; if the button is pressed briefly or accidentally the machine will not switch off. If the machine is switched off during a wash cycle, this wash cycle will be cancelled.
WASH CYCLE SELECTOR buttons: used to set the desired wash cycle (see "Table of wash cycles").
MEMORY button: press and hold the button to store a cycle with your own set of preferences in the memory of the machine. To recall a previously stored cycle, press the MEMO button.
FUNCTION buttons: press the button to select the desired function. The corresponding indicator light on the display will switch on.
SPIN button 
: press to reduce or completely exclude the spin cycle - the value is indicated on the display.
TEMPERATURE button 
: press to decrease the
temperature: the value will be shown on the display.
CHILD LOCK button: to activate the control panel lock, press and hold the button for approximately 2 seconds. When the symbol is illuminated, the control panel is locked. This means it is possible to prevent wash cycles from being modified accidentally, especially where there are children in the home. To deactivate the control panel lock, press and hold the button for approximately 2 seconds.
DELAY START button 
: press to set a delayed start time for the selected wash cycle. The delay time will be shown on the display.
DRYING button 
: press to set a drying cycle.
START/PAUSE button with indicator light: when the green indicator light flashes slowly, press the button to start a wash cycle. Once the cycle has begun the indicator light will remain lit in a fixed manner. To pause the wash cycle, press the button again; the indicator light will flash in an orange
colour. If the symbol 
is not illuminated, the door may be opened. To start the wash cycle from the point at which it was interrupted, press the button again.
$