Care and maintenance

		Cutting off the water and
	GB	Cutting off the water and
	GB	electricity supplies
		• Turn off the water tap after every wash cycle.
		• Turn off the water tap after every wash cycle.
		This will limit wear on the hydraulic system inside
		the Washer-dryer and help to prevent leaks.
		• Unplug the Washer-dryer when cleaning it and
		during all maintenance work.

Cleaning the Washer-dryer

The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.

Cleaning the detergent dispenser drawer

Remove the dispenser by raising it and pulling it out (see figure).

Wash it under running water; this operation should be repeated frequently.

Caring for the door and drum of your appliance

•Always leave the porthole door ajar in order to prevent unpleasant odours from forming.

Cleaning the pump

The Washer-dryer is fitted with a self-cleaning pump which does not require any maintenance. Sometimes, small items (such as coins or buttons) may fall into the pre-chamber which protects the pump, situated in its bottom part.

!Make sure the wash cycle has finished and unplug the appliance.