Control panel

PROGRAMME

knob and MEMORY buttons

O N - O F F/ CA N C E L

button with indicator light

T E M P E R AT U R E	WA S H		GB


button	C Y C L E	START/PAUSE button
SPIN SPEED	P H A S E	START/PAUSE button
	P H A S E	with indicator light
	icons	with indicator light
button	icons
button

END

ECO

				E C O		CHILD LOCK
		OPTION		indicator		button and indicator
INFO		OPTION		light	D O O R	light
button		buttons			D O O R
button		buttons		LOCKED
	DISPL AY	D E L AY E D		LOCKED
		D E L AY E D		indicator light
		START	button

ON-OFF/CANCEL button with indicator light : press the button briefly to switch the machine on or off. The green indicator light shows that the machine is switched on. To switch the washing machine off during a wash cycle, press and hold the button for approximately 2 seconds; pressing the button quickly or accidentally will not switch the machine off.

If the machine is switched off during a wash cycle, the programme will be cancelled.

PROGRAMME knob: this can be rotated in both directions. To set a more suitable programme, please refer to the “Table of Programmes”.

The knob is locked into position during the wash cycle.

MEMORY buttons: press and hold one of the buttons to store a cycle with your own set preferences in the memory of the machine. To recall a previously-stored cycle, press the corresponding button.

TEMPERATURE button: press to decrease the

temperature: the value will be shown on the display.

SPIN CYCLE button: press to reduce the r.p.m.

value or to exclude the spin cycle completely: the value will be shown on the display.

DELAYED START button: press to set a delayed start time for the selected programme. The delay time will be shown on the display.

OPTION buttons: the name of the option will be shown on the display when the corresponding button is pressed. When the relevant indicator light illuminates, this shows that the option has been selected.

INFO button: press the button to display information relating to the selected wash cycle and options.

WASH CYCLE PHASE icons: these light up to provide an indication of the progress of the wash

cycle (Wash - Rinse - Spin - Pump out ).

The text lights up when the cycle has finished.

START/PAUSE button with indicator light: when the green indicator light flashes slowly, press the button to start the wash cycle. When the cycle has started, the indicator light is illuminated in a fixed manner. To pause the wash cycle, press the button again; the indicator light will turn orange and begin to flash again. If the “Door Locked” indicator light is off, the porthole door may be opened. To restart the wash cycle from the point at which it was interrupted, press the button again.

DOOR LOCKED indicator light: this indicates that the porthole door is locked. To open the door, pause the wash cycle (see following page).

CHILD LOCK button and indicator light: this is used to enable or disable the “Child lock” function, by pressing the button for approximately 2 seconds. When the indicator light is illuminated, the control panel is locked. This avoids accidental changes being made to the wash cycles, especially where children are at home.

ECO indicator light: the icon lights up when the electricity saving reaches at least 10% (this can be achieved by adjusting the wash cycle settings).

When the machine is first switched on, you will be asked to choose a language (Select Language appears on the display): press the INFO button repeatedly until the required language appears on the display. After 5 seconds the language selection will be stored in the memory of the machine. If the wrong language is selected by mistake, press and hold the INFO and DELAYED START buttons simultaneously; this will return the language selection menu to the display.