Hotpoint AQLF9F 49 U manual Troubleshooting, Possible causes / Solutions

Page 17

Troubleshooting:

The machine's washing performance is unsatisfactory.

What happens if the tanks are loaded even if they are already full?

What happens if the dispenser is used in the traditional mode while the tanks are still full?

Can the tanks also be used for powder detergent?

Can powder detergent fall into the tanks?

What happens if the dispenser is not opened properly when filling the tanks?

What happens if detergent and fabric softener are erroneously inverted?

What happens if different detergents are mixed before the tanks are empty?

Possible causes / Solutions:

EN

The tanks have not been loaded correctly (e.g. fabric softener has been added instead of detergent or vice-versa)

Two different types of detergent/fabric softener have mixed.

￿NEVER mix two different detergents; always clean out the tanks before adding a new type of detergent.

The "Auto Dose System” is blocked due to prolonged lack of use: carry out a tank cleaning cycle (refer to "Cleaning cycle pre-set by user").

Buzzers (Beep) and visual signals (icons appearing on the display) indicate that the tank is full. If further detergent/fabric softener is added, the excess quantity will fall into the drum and will be washed away with the next cycle.

The machine will automatically track whether powder or liquid detergent has been loaded in the traditional mode and will not intake any amount of detergent from the tank. Fabric softener can only be used in the "Auto Dose System” mode.

No, powder detergent can only be used in the traditional mode.

No, there is a barrier to prevent powder detergent from falling into one of the tanks even if the dispenser is open in the "Auto Dose System" position (i.e. completely open).

If the dispenser is not completely open, the detergent or fabric softener that has been added will fall into the drum and will be washed away with the next cycle.

The washing machine will wash with unsatisfactory results, the tanks will have to be emptied and subjected to a manual cleaning cycle.

The machine will wash normally although we recommend only refilling the tanks after the signal emitted by the machine; do not mix different detergents/fabric softeners.

Remember, you will be charged for a service call for problems caused by incorrect installation, as listed above.

Not emptying contents from pockets may cause pump or drain blockages, or may damage the machine. Do not wash items which do not have a wash label, or wash items that are not intended as machine washable.

17

Image 17
Contents Washing Machine Instructions for installation and useUnpacking and levelling InstallationConnecting the electricity and water supplies Carried OUT by a Qualified Electrician Following Operations should beBlue Neutral N Brown Live L Green & Yellow Earth E AQLF9F 49 U Technical dataDescription of the machine Control panel Point then press the lever a Drawer up to the first stopOpen up to the second Stop point, making sure thatRelative vertical bars disappear from the display Signals for successive refillingDo not pour any fabric softener as the appropriate ButtonClose the Porthole Door Running a wash cycleThey are compatible with the selected cycle. PressingTable of wash cycles Wash cycles and optionsWash options Duration of the wash cycles can be checked on the displayDetergent Detergents and laundryPreparing the laundry Washing recommendationsGeneral safety Precautions and tipsDisposal Opening the porthole door manuallyCare and maintenance Problem Trouble shootingPossible causes/Solution Solved easily using the following listPage Possible causes / Solutions TroubleshootingAssistance GuaranteeAfter Sales Service 195093871.00