| Opening the porthole door manually |
AUS | In the event that it is not possible to open the porthole |
| door due to a powercut, and if you wish to remove the |
| laundry, proceed as follows: |
| 1. remove the plug from the |
| electrical socket. |
| 2. make sure the water level |
| inside the machine is lower |
| than the door opening; if it is |
| not, remove excess water |
| using the drain hose, |
| collecting it in a bucket as |
| indicated in the figure. |
| 3. remove the cover panel |
| on the lower front part of the |
| washer dryer (see overleaf). |
| 4. pull outwards using the |
| tab as indicated in the figure, |
| until the plastic |
| freed from its stop position; |
| pull downwards until you |
| hear a “click”, which |
| indicates that the door is |
| now unlocked. |
| 5. open the door; if this is |
| still not possible repeat the |
| procedure. |
6.reposition the panel, making sure the hooks are securely in place before you push it onto the appliance.
10