Kelvinator KL72TT user manual How to change the direction of the drain hoses

Before Using

How to change the direction of the drain hoses

Figure 1 indicates the ex factory
installation position of the drain	Figure 1
hose.

Extend the drain hose from the side of spin tub.

Side sectional view

Drain hose	Fixing hook
fixing hook	installation hole
Pull outwards		Drain hose
slightly

Take off

the drain hose

Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per Figure 2)

Rotate the drain hose fixing hook for 90 to take it out from the installation hole (As per Figure 3).

Drain hose fixing hook

Rotate the fixing hook for 90

Figure 2

Rotate the fixing hook for 90

Install the two drain hose fixing hooks taken out into the installation hole at the other side of the base frame (to aim at the installation hole accurately you can lean the washing machine forward slightly).Then rotate for 90 (As per Figure 4).

Pull the fixing hook outwards slightly. Inlay the drain hose into the fixing hooks reliably along the groove at spin tub side, and make it extend towards spin tub side.

Take off the fixing hook downwards

Figure 3

Figure 5

to fix it

Insert the fixing hook into the installation hole upwards

Figure 4

Figure 6

Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure

Extend the drain hose from the rear side

Take out the drain hose from the fixing hook. Extend it from the rear side (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).