Zanussi FJS 1097 NW manual Water inlet, Water drainage

Page 23

Water inlet

The inlets on the back of the appliance are colour coded, blue for cold and red for hot.

Before connecting the hoses be sure to fit the mesh filters «A» supplied as per diagram.

If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a «Y» connection piece.

Installation should comply with local water authority and building regulations’ requirements.

The appliance must be given a separate cold water supply and not be connected to a mixer tap, a single outlet water heater or a booster pump. A minimum water pressure of 0.48 bar is required for safe operation of the appliance.

If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system.

There should be a minimum distance of 5.02m (161/2 ft) between the appliance’s inlet and the bottom of the water storage tank.

There will be sufficient pressure for the hot water supply, providing there is a minimun height of 2.74 metres (9 ft) between the bottom of the cold water storage tank and the bottom of the hot water cylinder.

Set the hoses correctly by loosening the ring nuts. After positioning the inlet hoses, be sure to tighten the ring nuts again to prevent leaks.

A

P0003

P0021

Water drainage

This appliance is designed to be permanently plumbed into your home's water supply and drainage system.

The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece” supplied.

The standpipe should have an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe.

When discharging into a standpipe ensure that the top of the curve in the hose end is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level. The upright standpipe should have a minimum length of 30cm (12'') from the bottom of the elbow to the top of the pipe (see diagram).

Make sure that it is designed in such a way, that the end of the drain hose cannot be covered with water.

3 pin

 

 

90 cm.(35.4")

cm.

 

Max.

Min.60

(23.6")

P1039

 

 

cm.(12")

 

standpipe

 

 

1

 

 

 

38 mm.(1/2") diameter

Min. 30

 

 

 

 

 

 

P1040

23

Image 23
Contents Washing Machine Use InstallationChild Safety Contents Interest Environment Your New Washing MachineEcological hints Detergent dispenser drawer Description of the ApplianceDoor locked pilot light Control Panel Measure out the fabric softener Operating SequenceLoad the laundry Measure out the detergentAt the end of the programme Select the spin speedStart the machine Washing 2 KG of Mixed Fabrics AT 50C P0527S 1000g = 1 kg «JETSYSTEM» washWhich form? Which detergent?Important Notes Wash Care SymbolsOptions Washing ProgrammesType of laundry Programmes for synthetics, delicates and wool Maintenance and Cleaning Water drain filter Cleaning the filterSomething Not Working Customer Care Service & Spare Parts0870 5 Exclusions Standard guarantee conditionsEuropean guarantee Technical Specifications Installation InstructionsPositioning UnpackingWater drainage Water inletSpecial conditions LevellingInterest of the environment Permanent connection Electrical connection

FJS 1097 NW specifications

The Zanussi FJS 1097 NW is an innovative and highly efficient washing machine tailored to meet the dynamic needs of modern households. With its sleek design and thoughtful features, this appliance not only promises to deliver outstanding laundry results but also aims to simplify the user's experience.

One of the key highlights of the Zanussi FJS 1097 NW is its impressive capacity. With a generous drum size, it can accommodate up to 9 kilograms of laundry, making it ideal for families or those who frequently tackle large laundry loads. This feature enables users to wash more clothes in a single cycle, ultimately saving both time and energy.

The washing machine is equipped with an array of washing programs, allowing users to choose the best settings for their specific needs. From delicate fabrics to robust cotton, the machine has tailored cycles that ensure optimal care for each type of material. Additionally, the quick wash feature is particularly useful for busy lifestyles, providing a fast yet effective cleaning solution for lightly soiled garments.

Energy efficiency is a significant consideration for the Zanussi FJS 1097 NW, which boasts an impressive energy rating. This appliance not only reduces utility bills but also aligns with sustainability goals by lowering its environmental footprint. The inverter motor technology contributes to this efficiency, offering quieter operation and greater longevity compared to traditional motors.

The user-friendly interface is another standout feature of this model. With clear controls and an intuitive display, it allows for effortless programming, and the delay start option adds flexibility for users looking to take advantage of off-peak energy tariffs. Moreover, the machine includes a special cleaning program that ensures the drum and detergent dispenser remain fresh and hygienic.

Safety is paramount, and the Zanussi FJS 1097 NW incorporates features such as child lock to prevent accidental adjustments during operation. The anti-flood protection mechanism further enhances the safety profile, providing peace of mind when the machine is in use.

In conclusion, the Zanussi FJS 1097 NW stands out as a top-tier washing machine that combines efficiency, capacity, and user-centric features. It addresses the everyday laundry challenges faced by households while ensuring a sustainable approach to modern living. With its thoughtful technologies and design, this machine is an excellent addition to any home.