Zanussi FJ 1296 manual Servicing

Page 17

SERVICING

Before contacting your local ZANUSSI Service Centre, please make the following checks:

The machine does not start up

The ON/OFF button has not been depressed

The door is not closed properly

No water is entering the machine (see: the machine does not fill)

The selector dial is not correctly positioned

The machine does not fill

The water taps are not turned on

The water supply has been disconnected

The inlet hoses are kinked

The water pressure is too low

The water inlet filters are clogged

The door is not closed properly

The machine empties as it fills

If after the above checks, there is still a fault, call your local Zanussi Service Force Centre.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechani- cal or electrical breakdown. Please note that proof of purchase is required for any in-guaran- tee service calls.

Service & Spare Parts

If you require an engineer or wish to purchase spare parts contact your local Zanussi Service Force Centre by telephoning:

0990 929929

Your telephone call will be routed to the Service Centre covering your post code area.

Further information can be found in the accompa- nying customer care booklet and also in your tele- phone directory under “Z”.

When you call the Service Force Centre please make sure you give the model and serial number of the appliance.

The end of the drain hose is too low

The end of the drain hose is submerged in water

Drain pipe has no vent-hole

The machine does not drain or spin

You have selected a gentle programme with the rinse

 

hold option

The drain filter is clogged

 

The drain hose is kinked

 

 

Mod

 

Prod. No

P0042

Ser. No

 

This information can be found on the rating plate (see picture) or on the guarantee card.

The drainage system pipes are blocked

 

The drain hose extension is incorrect

 

The wash load is unbalanced: redistribute the clothes

 

inside the drum to allow the machine to spin

The machine leaks or overflows

Too much detergent

Unsuitable detergent

The inlet hose(s) is (are) loose

The detergent dispenser drawer or recess is clogged

The end of the drain hose is not securely positioned

The drainage system pipes are blocked

The machine vibrates or is noisy

The internal packing has not been removed

The machine is not level

The machine is in contact with the wall or furniture

The washing load is badly distributed

The machine is overloaded

The door does not open

The safety device has locked it

Water in the tub: the door cannot be opened if water

Customer Care

For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, please contact our Customer Care Department by letter or telephone as follows:

Customer Care Department

Zanussi

Zanussi House

Hambridge Road - Newbury - Berkshire - RG14 5EP

Tel 01635 521313

17

Image 17
Contents Washing Machine Technical Specifications ContentsImportant Information InstallationUnpacking InstallationPositioning Water inletLevelling Water drainageInterest of the environment Special conditionsElectrical connections Earth symbol or coloured green and yellowGetting to Know Your Machine 1000g = 1 kg Washing hints«JETSYSTEM» wash Important Notes Wash Care SymbolsProgrammes To use if Description Programmes for cotton and linenRecommended load max .5 kg 10 lb Recommended load max kg 4.5 lb wool max kg 2.2 lb Programmes for synthetics, delicates and woolCompartments Programme Programmes To use Dial positionWhich detergent? USE of Detergent and AdditivesUsing Your Machine Washing 2 KG of Synthetic Fabrics AT 40C Maintenance and Cleaning Water drain filter Cleaning the filterWater inlet filters Servicing European guarantee Standard guarantee conditionsThis guarantee does not cover Peace of Mind for Twelve Months124979662