Operating Sequence
Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
1.Load the laundry
Open the door.
Place the laundry in the drum, one item at a time, shaking them out as much as possible.
Close the door.
4. Switch the machine on
Press the ON/OFF button to switch the machine on. The display will show three blinking dashes or a blinking zero. The light above the button will light up.
| / | O |
| 0 |
N | F |
| ||
O |
|
|
| |
|
|
| F |
|
P0004
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment 
.
If you wish to carry out the prewash or a soak programme (OUTDOOR SPORTS), pour detergent into the appropriate compartment marked 
.
5.Select the desired programme/ fabric
Press the FABRICS button repeatedly, in order to select the desired programme/fabric. The relevant light will light up.
The lights relevant to the phases that form the programme will light up.
The display will show the duration of the selected programme, calculated on the basis of the maximum load for each type of fabric. The START/PAUSE button light will start flashing.
If the load of laundry to be washed is small, at the beginning of the cycle the display will still indicate the duration relevant to the maximum load. The duration value will be gradually adjusted during the cycle.
3.Measure out the fabric softener
If required, pour fabric softener into the compartment marked 
, without exceeding the «MAX» mark.
COTTONS SYNTHETICS
DELICATES
WOOL
HAND
WASH
PREWASH
WASH
RINSES
C0064 |
C0065 |
F | C | |
ABRI | S | |
| ||
SPIN
DRAIN
Close the drawer gently.
10