Zanussi TSE 1262 V, TSE 1062 V manual Drain, Electrical connection

Page 15

You cannot prolong the water inlet pipe. If it is too short, buy a longer pipe provided for this purpose.

3.6. Drain

The drain siphon must be pla- ced inside a drain pipe (or in a washbasin) at a height of between 70 and 100 cm. Make sure that it cannot fall.

Important: the drain pipe must never be prolonged. If it is too short, call a professional.

3.7. Electrical connection

You can only connect this washing machine to 230 V single phase power supply.

Check rating of the fuse line: 10 A at 230V.

The washing machine must not be connected through an extension cable or a power bar.

Check that the earthing connection is conform with the regulations in force.

15

Image 15
Contents Washing Machines TSE 1262 V TSE 1062 Contents Protection of the environment Precautions against frostUsage ScrappingWashing Machine Description Detergents dispenserControl panel HOW to do a Wash ? End of program Action during a programmeCottons Programs TableDetergents and additives Washing GuideSorting and preparing your washing Washing load depending on the nature of the materialJavel Water International symbols for care of textilesDrain filter Care and CleaningDescaling the washing machine SurfaceOperating Problems Protection against pests After Sales ServiceTechnical Characteristics For the InstallerInstallation Electrical connection DrainFrom the Electrolux Group. The world’s No.1 Choice