Zanussi FCS 1020 C Select the desired option by means of buttons 2, 3, 4, Cancelling a programme

Page 8

On programme progress display the pilot lights corre- sponding to all phases composing the selected pro- gramme are lit.

On position the programme is reset and the machine is switched OFF.

At the end of the programme the selector dial must be turned to position to switch the machine off.

Important! If you turn the programme selector dial to another programme when the machine is working, the lights in the programme progress display will start to flash to indicate a wrong selection. The machine will not perform the new selected programme.

Select the spin speed, Rinse Hold or No spin option

(8)

Select the spin speed, Rinse Hold option or No Spin op- tion by turning the spin speed selector.

For the maximum spin speed allowed by each pro- gramme, refer to the chapter Washing programmes .

•The position 1000 is equivalent to 900 rpm/min for the synthetic and wool programmes and 700 rpm/min for the delicate wash programme.

•The position 500 is equivalent to 500 rpm/min for all the wash programmes.

Select the desired option by means of buttons 2, 3, 4 and 5

Depending on the programme, different functions can be combined. These must be selected after choosing the de- sired programme and before pressing the button 6. The relevant light will illuminate.

If an incorrect option is selected, the corresponding in- dicator lamp flashes for about 2 seconds. For the com- patibility of the options with the washing programmes, refer to the chapter «Washing programmes» .

Start the programme by pressing button 6

To start the selected programme, press this button; the corresponding pilot light stops flashing and remains lit.

8

On programme progress display the pilot lights A and E illuminate to indicate that the appliance starts operating and the door is locked.

Altering an option or a running programme

It is possible to change any option before the programme carries it out.

Before you make any change, you must pause the washing machine by pressing the button 6 .

The programme can be changed as long as the button 6 has not been pressed. Changing a running programme is possible only by resetting it. Turn the programme selector

dial to and then to the new programme position. Start the new programme by pressing the button 6 again.

Interrupting a programme

Press the button 6 to interrupt a programme which is running, the corresponding light starts to flash. Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to position to cancel a pro- gramme which is running. Now you can select a new pro- gramme.

Opening the door after the programme has started

First set the machine to pause by pressing the button 6 . After some minutes, the door can be opened, when the following conditions are observed:

•The water temperature is below 55°C.

•The water level is below the bottom edge of the door.

•The machine doesn’t spin.

If you cannot open the door but it is absolutely necessary to open it you have to switch the machine off by turning the selector dial to . After few minutes the door can be opened

(Pay attention to the water level and temperature!). After this procedure, it will be necessary to set the pro- gramme and the options again and then press the button

6.

At the end of the programme

The machine stops automatically.

The pilot light D illuminates to indicate that the pro- gramme has finished. The pilot light E goes out, the door can be opened and the laundry can be removed.

If at the end of a programme there is water in the tub (when "Rinse hold" option has been selected), to empty out the water follow the following instructions :

• turn the programme selector dial to

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Washing machine FCS 1020 C Contents Safety informationChild safety Product descriptionUse So saving energyMachine front Detergent dispenser drawer Machine rearControl panel Spin speed selectorTable of Symbols FunctionsBefore first use Daily useLoad the laundry Green light of button 6 starts to flashCancelling a programme Select the desired option by means of buttons 2, 3, 4Interrupting a programme At the end of the programmeHelpful hints and tips Detergents and additives Degrees of water hardnessGree of hardness I = soft Soft Medium Hard Very hardWashing programmes Cold60-30 40-30Care and cleaning Maintenance WashExternal cleaning Cleaning the dispenser drawerCleaning the drawer recess Cleaning the water inlet filterWhat to do if… Selector to positionThere is water on the floor Change it with a new oneToo little detergent or unsuitable detergent has been used Door will not openSpinning starts late or the machine does not spin Technical data Consumption valuesInstallation Lifting the machineUnpacking SpinPositioning Water inletWater drainage Unevenness in the floorTo comply with the above safety precaution Service Centre Environment concernsPackaging materials 40 mm 650-800 mmMachine works more economically if it is fully loaded Ecological hintsPP=polypropylene Page Page Page 192996871-00-312009

FCS 1020 C specifications

The Zanussi FCS 1020 C is a compact yet highly functional washing machine that combines efficiency with modern design, making it an ideal choice for households with limited space. Known for its user-friendly features, this washing machine is designed to provide a cleaning performance that satisfies even the most demanding laundry requirements.

One of the standout features of the Zanussi FCS 1020 C is its impressive load capacity. With the ability to handle up to 5 kg of laundry, it is perfect for small families or individuals who need a reliable machine without taking up too much room. The compact design is tailored for tight laundry spaces, ensuring that you can enjoy efficient washing without sacrificing precious square footage in your home.

Equipped with a selection of 15 different washing programs, the FCS 1020 C caters to various fabric types and laundry needs. These programs include settings for delicate fabrics, fast cycles, and cotton, allowing users to customize their washing experience to suit every clothing item. Additionally, the machine features a quick wash cycle that can clean lightly soiled items in just 30 minutes, making it convenient for those on the go.

Energy efficiency is another hallmark of the Zanussi FCS 1020 C. With an A+++ energy rating, this washing machine minimizes energy consumption while delivering outstanding cleaning results. This not only contributes to a greener environment but also helps in reducing electricity bills, making it a cost-effective solution for everyday laundry needs.

The machine is also designed with user convenience in mind. Its easy-to-use control panel provides clear instructions and settings, making it accessible for users of all ages. The delay start function is another beneficial feature, allowing users to set the machine to begin washing at a specified time, thus fitting laundry cycles into busy schedules.

Moreover, the FCS 1020 C boasts a reliable spin speed of 1,000 RPM, which ensures that clothes come out drier, reducing the time needed for drying. This feature, combined with its robust build quality, provides peace of mind that your laundry will come out clean and damage-free, maintaining the integrity of your garments.

In conclusion, the Zanussi FCS 1020 C offers a perfect blend of functionality, efficiency, and convenience. With its compact size, comprehensive washing programs, excellent energy efficiency, and user-friendly features, it stands out as an optimal choice for anyone seeking a reliable washing machine tailored to meet modern laundry demands.
Top Page Image Contents