Zanussi TCS 683 LT manual Something not Working, Problem Possible cause, Dryer does not start up

Page 13

SOMETHING NOT WORKING

Before contacting your local Service Centre, please make the following checks:

Problem

Possible cause

The dryer does not start up

The door is open.

 

 

There is no electricity supply from the wall socket.

 

 

The fuse has blown.

 

 

The time selector dial is not set correctly.

 

 

The start button has not been depressed.

 

 

The water container is full or is not properly

 

 

 

positioned.

 

 

 

 

The dryer does not dry properly

The filter or the condenser is clogged.

 

 

Insufficient drying time.

 

 

The selected cycle is not suitable for the

 

 

 

laundry.

 

 

The water container is full or is not properly

 

 

 

positioned.

 

 

The low temperature function has been

 

 

 

selected.

 

 

Excessive laundry load.

 

 

 

 

If, after the above checks, there is still a fault, call your local Service Centre.

Please make sure you give the model and serial number of the appliance.

This information can be found on the rating plate.

ENGLISH

13

Image 13
Contents TCS 683 LT Ecological hints Your NEW Tumble DryerEnvironment protection Packaging recyclingContents Service/Repair InstallationGeneral safety UseDescription of the Appliance Technical SpecificationsConnecting a drain hose InstallationPositioning Electrical connectionControl panel USECotton and Linen Drying TimesSynthetics Size of loadUseful hints Operation Drying sequenceAfter drying External cleaning MaintenanceCleaning the filter Cleaning condenserThis container must be emptied after every cycle Emptying water containerInsert container correctly Something not Working Problem Possible causeDryer does not start up Dryer does not dry properly