Door Reversal Instructions
The appliance is supplied with the door opening from right to left. If you wish to change the opening direction, proceed as follows (see picture A):
1.Unhook door stopper «A» from its seat «a» and loosen from hole «b» by a 90° rotation.
2.Remove the plastic plug from hole «c» by a 90° rotation and
3.Unscrew hinge «B» (loosen the 2 screws, holding the door securely) and lower the door from the top pivot.
4.
5.Loosen door catch «C» by pressing both lugs together (see small illustration).
6.Loosen opposite plastic part «D» as in step 5 (you may need to use a screwdriver to assist in both steps 5 and 6 ).
7.Interchange and insert parts «C» and «D».
8.Remove screws «E» and refit on the opposite side. Fix hinge «B» on the right handside. Do not fully tighten the screws.
9.To mount door, see picture B:
●First locate into upper right hand hole with upper pin «F».
●Then place lower pin into the hinge «B» at the bottom of the door.
●Align door before tightening hinge.
●Tighten hinge.
10.Remove the plug from hole «d» and refix in hole«a» (Fig. A).
11.Fix door stopper «A» in hole «c» by 90° rotation.
12.Hook door stopper «A» into hole «d».
F |
|
|
|
| c |
d | D |
|
|
| |
C | b A |
|
a | B |
|
| E | |
|
| |
| C |
|
| 1 |
|
1 | 2 |
|
P0866 |
| A |
|
| |
| c | F |
| A | d |
|
| B |
|
| C |
P0865 |
| B |
16