SERVICING
Before contacting your local Zanussi Service Centre, please make the following checks:
The dryer does not start up
■The door is open.
■The plug is not fitted into the wall socket.
■There is no electricity supply from the wall socket.
■The time selector dial is not set correctly.
The dryer does not dry properly
■The filter is clogged.
■Insufficient drying time.
■The selected cycle is not suitable for the laundry.
■Excessive laundry load.
■The dryer is not correctly installed.
If, after the above checks, there is still a fault, call your local Zanussi Service Centre.
Please make sure you give the model and serial number of the appliance.
This information can be found on the rating plate (see picture) or on the guarantee card.
| Mod. ... |
| Prod. No |
P0307 | Ser. No |
|
14