Zanussi TDE 4224 manual Installation, Fitting the vent hose, Unpacking

Page 7

Installation

Warning!

Unpacking

Slide out the polythene bag with the polystyrene stuffing before using the appliance.

P1106

Positioning

The feet must never be removed.

Do not restrict the floor clearance through deep- pile carpets, strips of wood or similar. This might cause heat build-up which would interfere with the operation of the appliance.

Important

When operating the tumble dryer, the room temperature must not exceed 35°C, as it may affect the performance of the appliance.

Fitting the vent hose

To simplify the installation, there is a choice of vent outlets: one at the back, the others in the left and right-hand side.

Connect the hose to whichever is the more convenient by pulling the ring nut (A) from the vent outlet at the back, screwing it on to the hose and pushing it firmly back into place.

The unused vents should now be sealed with the special snap covers provided.

ENGLISH

It is recommended that, for your convenience, the machine is positioned close to your washing machine. Whilst drying, the tumble dryer will expel a certain amount of warm, very moist air, and this should be removed from the room as quickly as possible to prevent condensation. In an extremely well ventilated room or close to an open window, this may occur naturally.

However, in general, it is better to carry the dryer's exhaust outside via the 100 mm diameter flexible hose supplied with the appliance; ending either

P1028

A

A

P1027

temporarily at an open window, or permanently at a fixed ventilation grille, fitted to an exterior wall or window.

The tumble dryer must be installed in a clean place, where dirt does not build up.

Make sure there are no obstructing items or material near the air-intake louvres provided at

the back (e.g. paper, rags etc.).

To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface.

Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is.

P0046

Advice: If the hose is long and the room temperature low, the moisture might condense to water inside the hose. This is an unavoidable natural phenomenon. To prevent this water from Iying in the hose or flowing back into the tumble dryer, it is advisable to drill a small hole (dia.

3 mm) in the lowest point of the hose and to place a small container below it.(See picture, point B).

P1056B

7

Image 7
Contents Tumble Dryer Secadora Transport damages Dear customerTechnical specifications ContentsChild safety Important safety informationInstallation General safetyMachine DisposalTips for environmental protection Packaging materialsDescription of the appliance Fitting the vent hose InstallationUnpacking Stacking kit Electrical connectionDoor reversal Use Time controlled drying Anti-creasing phase lightProgramme/Time selector dial Electronically controlled drying automaticFresh & Cool Programme chartAutomatic drying electronic programmes Time controlled dryingDrying Operating sequenceAfter each use Useful hints Cleaning the filters Maintenance and CleaningExternal cleaning Cleaning the doorDryer does not dry properly Problem Possible causeSomething not working? Dryer does not work

TDE 4224 specifications

The Zanussi TDE 4224 is a highly efficient condenser tumble dryer that combines modern technology with functional design to provide a reliable laundry solution for any household. This appliance is especially appreciated for its compact size, making it an excellent choice for homes with limited space while still offering ample drying capacity.

One key feature of the TDE 4224 is its impressive 7 kg drying capacity, making it suitable for medium-sized families or couples. This size allows users to dry a significant amount of laundry in one cycle, reducing the need for multiple drying sessions and saving valuable time.

The TDE 4224 is equipped with a variety of drying programs tailored to different fabric types and user needs. From delicate items to heavier garments, the dryer has specific settings that ensure optimal drying without compromising the quality of the fabrics. This versatility is enhanced by its sensor drying technology, which detects moisture levels in the clothing and adjusts the drying time accordingly. This not only prevents over-drying but also helps in conserving energy, making it an environmentally friendly option.

Energy efficiency is a crucial aspect of the Zanussi TDE 4224, designed to operate with a low energy consumption rating. This means users can enjoy reduced electricity bills while contributing to sustainability efforts. Its condenser drying system allows for the collection of moisture into a tank, eliminating the need for external venting and simplifying installation.

The appliance features an easy-to-use control panel that allows for straightforward operation. Users can select programs and monitor cycle progress with ease. Additionally, the TDE 4224 includes a reverse tumble action, which helps to prevent clothes from tangling and reduces creasing, making ironing easier after drying.

Maintaining the TDE 4224 is simple, thanks to its accessible fluff filter and easy-to-empty water tank. Regular cleaning of these components ensures optimal performance and prolongs the life of the dryer.

In summary, the Zanussi TDE 4224 is a robust and user-friendly tumble dryer that delivers effective drying performance while adhering to modern energy standards. It is filled with features that cater to the diverse needs of today’s laundry, making it a valuable addition to any home.